On 26/10/16 07:20, John Erlandsson
wrote:
Error is gone.
I'll try to write configuration files and test it properly later
this week.
OK, thanks for letting us know
On Monday, October 24, 2016 at 6:01:19 PM UTC+2, Schooner wrote:
On 24/10/16 14:24, John Erlandsson wrote:
It actually says revision 4.
--------------------------------------------
cat /proc/cpuinfo --------------------------------------------
processor : 0
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 76.80
Features : half thumb fastmult vfp edsp neon
vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 76.80
Features : half thumb fastmult vfp edsp neon
vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 2
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 76.80
Features : half thumb fastmult vfp edsp neon
vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 3
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 76.80
Features : half thumb fastmult vfp edsp neon
vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : BCM2709
Revision : a02082
I was rather suspicious about this revision number, or
should I say the one which has already been committed.
However it looks like both are valid and relate to the
rpi v3 B
http://elinux.org/RPi_HardwareHistory
Just depends on the manufacturer
Leave it with me for a while and I will set up both
revisions as valid for cpu revision 4 and advise when
there is
a package containing it to test
https://github.com/machinekit/machinekit/pull/1085
refers
Will take 30 mins to test build, then needs someone to
merge it and 2 - 3 hours for package builds to complete.
Probably best to check the repo tomorrow for the new built
packages.
They are just starting to come through
Seem to recall that the raspbian package is the last to be
built
You should be looking for machinekit-xenomai_0.1.1477321845-1mk.travis.master.git7495c33a~1raspbian_armhf.deb
in deb.machinekit.io/debian/pool/main/m/machinekit/
regards
Serial : 00000000376aff9f
-----------------------------------------------------------------------------------------------------------
But I get this error in /var/log/linuxcnc.log when
trying to load hal_gpio:
Oct 23 11:00:23 raspberrypi rtapi:0:
rtapi_app_main(hal_gpio): -22 Invalid argument
Oct 23 11:00:23 raspberrypi msgd:0: hal_lib:1854:rt
HAL_GPIO: ERROR: board revision 5 not supported
This is just because it defaults to 5 if the rev number is
not in the list
I am not worried about breaking my installation. I
would like to try and use a buildroot system
eventually. Currently just testing.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit
---
You received this message because you are subscribed
to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving
emails from it, send an email to machinekit+...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit
---
You received this message because you are subscribed to
the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to machinekit+...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit
---
You received this message because you are subscribed to
the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to machinekit+...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io
blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the Google
Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
|
