I have got Machinekit running on a BBB with config files for a Probotix cape. I have had to clone the Probotix cape on veroboard because Probotix did not respond to my emails when I tried to buy one.
Currently I am getting no response on my inputs and outputs. They are high impedance at the moment, which makes me think that they have not been assigned by the device tree. I would like to know how I can send or receive logic 1s and 0s on the gpio pins, while I have the Machinekit config files running. Currently I do this with Axis GUI and do a homing operation to see if I get any voltage signals out of the BBB. I would like a better more methodical way of doing this. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.