Sorry, I know this is getting a long thread. It seems as if the rtapi_app is unable to connect to shared memory. When I start the app standalone, the following appears in the syslog
*rtapi:0: rtapi_app:0 ERROR: cannot attach glocal segment key=0x154711 No such file or directory* Op woensdag 24 mei 2017 13:39:32 UTC+2 schreef michelvand...@gmail.com: > > How do I prevent the build-script from building a RIP version? It seems > that it does this automaticly > > > Op woensdag 24 mei 2017 13:12:33 UTC+2 schreef Schooner: >> >> >> >> On 24/05/17 11:36, michelvand...@gmail.com wrote: >> >> Strange thing is that the same config file works when I start it with the >> prebuild machinekit on the same machine. >> >> It looks like the rtapi_app fails, or is unresponsive for some reason >> >> >> It is always possible that this is just where it got to when the process >> died, so not directly relevant. >> >> Do what Bas suggested and use DEBUG=5 and look at /var/log/linuxcnc.log >> after a failure >> >> libwebsockets is optional now since >> https://github.com/machinekit/machinekit/commit/320e76dbd51ab5bd2fa8a04dcb4ea90f2394bfbe >> >> If you built a RIP without enabling libwebsockets, it will be undefined, >> even though the library is still there, should not be connected to your >> problem. >> >> >> >> >> Op woensdag 24 mei 2017 11:44:45 UTC+2 schreef Schooner: >>> >>> It is saying it cannot find the section [DISPLAY] INTRO_GRAPHIC >>> >>> can't say further without your .ini file >>> >>> You should not need INTRO_GRAPHIC or INTRO_TIME, but if you do have them >>> what they point to must be valid >>> >>> >>> >>> On 24/05/17 10:32, michelvand...@gmail.com wrote: >>> > Can not find -sec DISPLAY -var INTRO_GRAPHIC -num 1 >>> > 2511 >>> > PID TTY STAT TIME COMMAND >>> > Stopping realtime threads >>> > Unloading hal components >>> >>> -- >> website: http://www.machinekit.io blog: http://blog.machinekit.io >> github: https://github.com/machinekit >> --- >> You received this message because you are subscribed to the Google Groups >> "Machinekit" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to machinekit+...@googlegroups.com. >> Visit this group at https://groups.google.com/group/machinekit. >> For more options, visit https://groups.google.com/d/optout. >> >> >> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.