Charles, I understand how ignoring HDMI to start may be easier, however, the reason that I bought the DE10 instead of the DE0 is the HDMI. :-(
Alan On Tuesday, August 8, 2017 at 4:01:07 AM UTC-7, Charles Steinkuehler wrote: > > Yes, it would be much easier to load a single FPGA image via U-Boot > rather than deal with partial reconfiguration. > > I was planning on just ignoring the HDMI to start. :) > > On 8/7/2017 11:05 PM, Michael Brown wrote: > > BTW > > It may be possible to boot configuring the fpga from u-boot with > framebuffer and > > hm2 cores and then start machinekit hm2_soc_ol driver without > firmware=xxx.dtbo > > for easy DE10-Nano fb startup. (uio driver then needs a uio entty in dts > also to > > load). > > > > > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.