I am using Vectric Cut2d for my designs and have been using EMC2 post processors for the g code creation. Everything works except that the text on engravings are somewhat distorted, ie a straight line on the bottom of an "L" is curved. Also circles are not complete, there is a very small opening at the ends. All of the distortions seem to be the identical when repeating an engraved word, so it seems that it may be more of a code issue than a mechanical issue. I am wondering if anyone else has had this problem and if there is a dedicated post processor for machinekit running on a BBB.
Harley -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.