On Monday, May 14, 2018 at 11:29:45 PM UTC-8, fairbanks-john wrote: > > I just made a fresh install from the git hub clone today and wondering if > I did something wrong since there are a lot of warnings and notes in the > installation log which I have attached.. > The .hal file I have used before for testing fails to complete loading at > the below error message: > > Traceback (most recent call last): > File "/home/cnc/machinekit-dev/bin/gmoccapy", line 30, in <module> > import hal_glib # needed to make our own hal pins > File "/home/cnc/machinekit-dev/lib/python/hal_glib.py", line 20, in > <module> > from machinetalk.protobuf.message_pb2 import Container > File "build/bdist.linux-x86_64/egg/machinetalk/protobuf/message_pb2.py", > line 16, in <module> > File "build/bdist.linux-x86_64/egg/machinetalk/protobuf/nanopb_pb2.py", > line 26, in <module> > TypeError: __init__() got an unexpected keyword argument 'syntax' > Shutting down and cleaning up Machinekit... > > Last time I installed Machinekit I was able to load my .hal file but got > stuck on communications to the Ethernet Mesa 7180 board which is till and > issue for me but I do now have a additional board to try to load the bit > file in a different way. This new Machinekit install is to to be used to > work on the interface requirements for the Labview coded gui that I have > partially completed for use with Machinekit. I expect that my biggest > problem with be with the Protocol Buffers encoding/decoding since I do not > have a clear understanding about those methods yet. >
-- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
