Thanks, the debug hint helped I figured out that I did not wire iocontrol correctly
This did the trick: net tool-change-loopback iocontrol.0.tool-change => iocontrol.0.tool-changed net tool-prepare-loopback iocontrol.0.tool-prepare => iocontrol.0.tool-prepared Am Donnerstag, 2. Mai 2019 09:06:23 UTC+2 schrieb Schooner: > > Not much time to look at this right now. > > Touchy is untouched (no pun intended) by us from linuxcnc, if it worked > there it will work here. > > To debug gcode, make sure the DEBUG= line in the ini file is set to a high > number. > 0x07 should do, but experiment. > > No idea what output touchy produces, if you get meaningful output with > Axis, use that until you find the error. > > The line looks OK, but lacks the usual terminating ';'. > > > On 02/05/19 07:07, Malte Schmidt wrote: > > Hi, > > I have a specific question to using the tool table and tools in general > and a general question on debugging gcode. > > My situation: > Running Machinekit on BBB using Touchy as UI. Machine is a lathe. > Generally works like a charm. Now I need to set tools and tool radius to > get a proper radius cut on a workpiece. The issue is that this code is not > working: > > My tool table file: > T1 P1 X0 Z0 D0.2 I90 J30 Q2 > > Whenever I insert either > M6 T1 G43 > or > T1 G43 > or > T1 > > My gcode stops working (it works without tool selection and cutter > compensation) > > I also tried to use G10 L1 P1 R0.02 Q2 before the line with T1. Same > result + this erases the tool table file. > > My specific question what is wrong with this approach? > > My general question is related to error messages (and touchy). I'm using > Linuxcnc / Axis on a Mill on a PC and know that is prints helpful error > messages that help debugging these kind of gcode related problems. In my > case on the lathe I just don't get any information. No error, message, > nothing. The machine just does not start. Is there a way to debug this? > Which interface(es) is/are used to convey error messages? Can / will this > be written in a log file? I'm happy to debug touchy here / add > functionality but I don't really know where to start. > > Any help would be appreciated > Many thanks, > Malte > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
