Hello, I have had lots of help throughout the setup process of getting machinekit to work properly/Charles graciously got our HAL and INI files working beautifully. I have been able to fix/troubleshoot/have the community/Charles fix-answer most of the issues I have been having, however, I am currently having an issue when launching machinekit that I can't figure out.
I am running a Beaglebone Black with CRAMPS cape attached. The setup is a 4 axis CNC, this is the BCNC Bamboo CNC project that I have posted about earlier in the machinekit group - if you recognize it. I launch the config selector from the command line and select the config I have. This all seems to work fine. I then get the machinekit splash screen, and then nothing. In the terminal, it seems to be stuck on the line "Waiting for /sys/class/uio/uio0..........." but nothing ever loads. I'm not sure what this means, or how to fix the problem. I was looking into what this error means and saw some discussions in this group about the Linux booting process? I wasn't able to completely understand what was wrong or how to fix it, so any help clarifying what I should try next would be greatly appreciated. Many thanks appreciated for any help anyone can provide. Thank you for your time, Bradley -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/f6736872-d4cd-4225-9601-d3587c04d984%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
