I am retrofitting a New Hermes engraver with MachineKit, a Probotix PBX-BB breakout board (the earlier version), and Geckodrive G251X drives, but am having trouble getting started again. i began this journey three years ago, but am just picking it back up.
downloaded latest image from here onto 8gb SD card: https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB_.28All_Revs.29_Machinekit the beaglebone boots up just fine, and i get a home screen with the beagle beagleboard.org screen image. using command terminal, the "machinekit" command returns nothing. the original image i used two years ago had machinekit listed in the start menu. how do i access the Axis screen now? thanks for patience, there are a lot of learning curves for me. Marshall -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/c62a4d03-38ac-43af-a5cc-1fb100135412%40googlegroups.com.
