MD5? On Tuesday, 17 December 2019 23:06:22 UTC, Jeff Pollard wrote: > > Hi, > > An update: I downloaded the image file again, and it now works. > I'm not sure what was going on... > > Jeff > > On Saturday, December 14, 2019 at 7:30:49 PM UTC-8, Jeff Pollard wrote: >> >> Hi, >> >> I am using a recent machinekit image: >> >> bone-debian-9.11-machinekit-armhf-2019-12-02-4gb.img.xz >> >> I have it running on my PocketBeagle, but I can't seem to communicate >> with the I/O through hal. I've done: >> >> config-pin -f Sample.bbio *(a listing of this file is below)* >> realtime start >> halcmd loadrt hal_bb_gpio board=PocketBeagle output_pins=202,204,206,208 >> input_pins=227,229,231,233,128 >> halcmd loadusr halmeter >> >> From here, halmeter runs and will list all of the I/O expected, but if I >> select an input (i.e. bb_gpio.p2.in-33) and watch for change, the display >> will not change when I change the state of the pin. >> >> If I query the state of the same pin using: >> >> config-pin -q 2.33 >> >> I can read the proper state of the pin. >> >> My uEnv.txt has not been modified. It has: >> uname_r=4.19.72-bone-rt-r40 >> enable_uboot_overlays=1 >> uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo >> enable_uboot_cape_universal=1 >> cmdline=coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet >> >> Am I missing a configuration step somewhere? >> >> Thanks, >> >> Jeff >> ============================= >> Sample.bbio >> --------------------- >> overlay cape-universal >> overlay cape-bone-iio >> P2.02 out # out 1 >> P2.04 out # out 2 >> P2.06 out # out 3 >> P2.08 out # ou1 4 >> >> P2.27 in # in 1 >> P2.29 in # in 2 >> P2.31 in # in 3 >> P2.33 in # in 4 >> P1.28 in # in 5 >> >>
-- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/8c6cfd9d-100c-439b-95ae-6b29e9a702a4%40googlegroups.com.
