Hello all...We have one axis that by gravity will always go the limit if the unpowered state. This is not a problem unless we lose power in the building. We can manually get the machine started by just holding it into position when firing the machine up, but would prefer to be able to do this remotely.
For this to work we would need to be able to ignore the bottom limit switch for a brief period of time on startup. Is there a way to do this? For instance, you would have to be able to ignore the limit switch at first, then, once homed, arm it again. Thanks so much! -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/c3ede903-e3f8-4d06-87b1-1ce7f6afdc3bn%40googlegroups.com.