Hi, As stated in the subjectline, these are the combination fo hardware and software I have setup: BeagleBone Black Rev C Xylotex BareBonesCNC Machine kit image -> https://rcn-ee.com/rootfs/bb.org/testing/2020-06-01/stretch-machinekit/bone-debian-9.12-machinekit-armhf-2020-06-01-4gb.img.xz
I have copied the following files from Xylotex's website and put them in the right folder and changed permission of the *.sh file. BareBones.hal BareBones.ini BareBones_setup.sh However, upon starting machinekit, the configuration selector window popus up, then comes the "machinekit" splash screen but then no progress. Terminal reports the following: *machinekit@beaglebone:~$ machinekitMACHINEKIT - 0.1Machine configuration directory is '/home/machinekit/machinekit/configs/ARM.BeagleBone.Xylotex'Machine configuration file is 'BareBones.ini'Starting Machinekit...rtapi_msgd command: /usr/libexec/linuxcnc/rtapi_msgd --instance=0 --rtmsglevel=1 --usrmsglevel=1 --debug=1 --halsize=524288rtapi_app command: /usr/libexec/linuxcnc/rtapi_app_rt-preempt --instance=0 --debug=1io startedemc/iotask/ioControl.cc 859: can't load tool table.halcmd loadusr io startedgrep: /sys/devices/bone_capemgr.*/slots: No such file or directoryLoading cape-universal overlaybash: /sys/devices/bone_capemgr.*/slots: No such file or directoryError loading device tree overlay file: cape-universalBareBones.hal:6: program './BareBones_setup.sh' failed, returned 1Shutting down and cleaning up Machinekit...Cleanup doneMachinekit terminated with an error. For simple cases more informationcan be found in the following files: /home/machinekit/linuxcnc_debug.txt /home/machinekit/linuxcnc_print.txtFor other cases get more meaningfull information by restarting after export DEBUG=5and look at the output of: /var/log/linuxcnc.log dmesgWhen looking for errors, specifically look for libraries that fail to loadby looking for lines with 'insmod failed' as per example below.insmod failed, returned -1:do_load_cmd: dlopen: nonexistant-component.so: cannot open shared object file:No such file or directory* Wha have I done wrong ? Is it because I am using a different machinekit image than what is mentioned at Xylotex's web page ? Anoop -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/fa3de441-c671-4b7c-9b82-8606c4fa3289n%40googlegroups.com.
