> I have a HP 960 running through a JetDirect 300x with firmware h.08.32. > The three Macs on the network are running 10.2. One mac keeps getting > the print job stopped when I reactivate it the job again stops. Mac two > gets the setting up the connection message infinitely while the third > managed to print after a 3 min. wait. Every thing was going well until > we had a network shut down caused by the modem. (PacBell). Two Macs are > running under the print driver than comes with Jaguar while one (the > one that keeps stopping) runs the newer 2.0e update. Any ideas > > Thanks > Richard
Sorry - I haven't checked my (list) email lately.. Well, if your on a tcp/ip network (which it probably is), you could try connecting directly to the printer using (lpr?) IP Printing. If the "use default queue on printer" doesn't work, then uncheck it and put in "PORT1". You could also try option-clicking on the "add printer", and select "Advanced" and try using "appsocket/hp jet direct" as well. Lots of options with mac os x. Also - perhaps there is an even newer driver version out? Odd that each computer gets a different error. Or perhaps even simply removing the printer from the print center and adding it back in. thanks, Ian Sidle -- MacNetwork is sponsored by <http://lowendmac.com/> and... XRouter Pro | Share your DSL or cable modem between multiple computers! Dr. Bott | Only $199 <http://www.drbott.com/prod/MIH130.html> Support Low End Mac <http://lowendmac.com/lists/support.html> MacNetwork list info: <http://lowendmac.com/lists/macnet.html> --> AOL users, remove "mailto:"; end list messages to: <mailto:macnetwork@;mail.maclaunch.com> To unsubscribe, email: <mailto:macnetwork-off@;mail.maclaunch.com> For digest mode, email: <mailto:macnetwork-digest@;mail.maclaunch.com> Subscription questions: <mailto:listmom@;lowendmac.com> Archive: <http://www.mail-archive.com/macnetwork%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
