On Wednesday, October 16, 2002, at 11:22 PM, Dan Sugalski wrote:
Okay, I'm a half-step from yanking some hardware into the shop, but before I do...These errors are symptomatic of a memory problem. OS X ... ESPECIALLY Jaguar is VERY memory sensitive. I have a Rev1 Beige G3 which runs 9.2.2 and 10.1.5 without problems; however, trying to install 10.2 (jaguar) elicits the exact same symptoms. (I went through the Jaguar beta cycle with Apple over these problem.)
I've got an oldish iMac, a slot-loading 400 MHz G3, that's currently running 9.2.2. I *want* to install OS X on the thing, but I'm being thwarted here, which is annoying.
The machine runs 9.2.2 just fine, and hardware diagnostics say it's just fine. Upgraded the disk drivers to the latest version, and zapped the heck out of the pram. It is, at least as far as I can tell, all good.
Unfortunately I can't install OS X on the damn thing. Every time I try, the installer crashes, hangs, or tells me to restart the machine. I've tried a retail 10.1 install kit, retail 10.2 install kit, and the 10.1 install from my iBook. No joy from any of them.
The freezes/crashes aren't consistent either. Sometimes it'll hang at the grey apple screen (with the progress indicator spinning), sometimes it'll crash with an error 139, 136, or 0, and sometimes it gets to the blue startup screen and pops up a "you have to restart your machine" screen (in three or four languages). I can't even do a clean format and install--I can't get that far.
OS X in general and Jaguar in particular, has been optimized for "in spec" memory.
Generally speaking, if you have memory that is older than about 18 months, from any vendor other than Apple itself, it has a "lifetime warranty." Call the source, and make certain that you indicate you are installing OS X and have memory problems. They will swap your dims (once the backlog from the dockworkers strike clears out) and the OS X install will magically work.
T.T.F.N.
William H. Magill
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
