Hi,
This is related to MacPorts only because I tend to get the errors (below) in my
logfile mostly when I leave Qt's bearer plugins enabled ...
The error:
FIXME: IOUnserialize has detected a string that is not valid UTF-8, ""W³"
The apparent source, from the IORegistry :
{{{
| | | | +-o BCM5701Enet <class BCM5701Enet, id 0x100000231,
registered, matched, active, busy 0 (361 ms), retain 10>
| | | | | {
| | | | | "IOPacketFilters" =
{"IONetworkFilterGroup"=0x113,"IOEthernetDisabledWakeOnLANFilterGroup"=0x0,"IOEthernetWakeOnLANFilterGroup"=0x1}
| | | | | "IOMaxPacketSize" = 0x233a
| | | | | "mDNS_Keepalive" = Yes
| | | | | "IOMinPacketSize" = 0x40
| | | | | "WOL-State" = "disabled"
| | | | | "Configuration Data" =
{"StdRcvThreshold"=0x8,"TxCoalescingTicks"=0x96,"JumboRcvThreshold"=0x5,"MTU"=0x233a,"RxCoalescingTicksDuringInt"=0x78,"EnableRxHwCksum"=Yes,"RxMaxCoalescedFrames"=0xf,"TxMaxCoalescedFrames"=0x40,"TxCoalescingTicksDuringInt"=0x96,"RxMaxCoalescedFramesDuringInt"=0xf,"Batch_ARP_Enable"=Yes,"TxSendBuffers"=0x1f4,"TxMaxCoalescedFramesDuringInt"=0x40,"EnableTxHwCksum"=Yes,"RxStdRcvBuffers"=0x1fe,"WOL"="Enable","TxPacketQueueSize"=0x400,"PassUpCRC"=No,"RxJumboRcvBuffers"=0x80,"RxCoalescingTicks"=0x19}
| | | | | "IOModel" = "57765-B0"
| | | | | "IONameMatched" = "pci14e4,16b4"
| | | | | "NVRamInfo" = "Offset=0x2f8, PageSize=264,
Chip=AT45DB021D-2Mb-D"
| | | | | "BJP_Firmware_Version" = "1.19"
| | | | | "Driver_Version" = "3.8.1b2"
| | | | | "IOPowerManagement" =
{"MaxPowerState"=0x2,"CurrentPowerState"=0x2}
| | | | | "FirmwareVersionString" = "57765-v1.37, 0x7287af41"
| | | | | "mDNS_KEY" = "2009-07-30"
| | | | | "IOMediumDictionary" =
{"00000020"={"Index"=0x0,"Type"=0x20,"Flags"=0x0,"Speed"=0x0},"00200023"={"Index"=0x0,"Type"=0x200023,"Flags"=0x0,"Speed"=0xa},"00500030"={"Index"=0x0,"Type"=0x500030,"Flags"=0x0,"Speed"=0x3e8},"08100023"={"Index"=0x0,"Type"=0x8100023,"Flags"=0x0,"Speed"=0xa},"00900026"={"Index"=0x0,"Type"=0x900026,"Flags"=0x0,"Speed"=0x64},"00100026"={"Index"=0x0,"Type"=0x100026,"Flags"=0x0,"Speed"=0x64},"08100030"={"Index"=0x0,"Type"=0x8100030,"Flags"=0x0,"Speed"=0x3e8},"08500026"={"Index"=0x0,"Type"=0x8500026,"Fl$
| | | | | "IOMACAddress" = <3c07540cf007>
| | | | | "IOFeatures" = 0xa
| | | | | "IOVendor" = "Broadcom"
| | | | | "IOLinkSpeed" = 0x3b9aca00
| | | | | "CFBundleIdentifier" =
"com.apple.iokit.AppleBCM5701Ethernet"
| | | | | "IOProviderClass" = "IOPCIDevice"
| | | | | "IOSelectedMedium" = "00000020"
| | | | | "BatchARP" = ""W?≥"
| | | | | "IONameMatch" =
("pci14e4,1684","pci14e4,16b0","pci14e4,16b4","pci14e4,1682","pci14e4,1686")
| | | | | "IOClass" = "BCM5701Enet"
| | | | | "IOLinkStatus" = 0x3
| | | | | "IOActiveMedium" = "00500030"
| | | | | "IOPCITunnelCompatible" = Yes
| | | | | "Partner-Capabilities" =
{"1000baseT-EEE"=No,"Pause"=Yes,"10baseT-full-duplex"=Yes,"100baseTX-full-duplex"=Yes,"Asymmetric-Pause"=No,"10baseT-half-duplex"=Yes,"1000baseT-full-duplex"=Yes,"100baseTX-EEE"=No,"100baseTX-half-duplex"=Yes}
| | | | | "IOMatchCategory" = "IODefaultMatchCategory"
| | | | | "RxPolling" = No
| | | | | "IOProbeScore" = 0x0
| | | | | "SleepState" = "D0"
| | | | | }
}}}
Judging from the MAC address, that's my built-in ethernet adapter.
The exact offending string is apparently {'"', 'W', '?', \0342, \0211, \0245}
I cannot find any information about this `BatchARP` parameter, but none of the
other internet devices have it.
Does anyone know this setting, if it's possible to change it and if so, how?
Thanks,
René
_______________________________________________
macports-users mailing list
[email protected]
https://lists.macosforge.org/mailman/listinfo/macports-users
