> On Jul 26, 2016, at 23:04, Ryan Schmidt <ryandes...@macports.org> wrote: > > > On Jul 26, 2016, at 7:23 PM, Richard L. Hamilton wrote: > >> Which compiler was used for pre-built libiodbc? It failed on both my El >> Capitan boxes, until the pre-built was available, and that installed of >> course. It's also failing on the Snow Leopard, and I doubt there's a >> pre-built one for that. I'm hoping for better luck if I build with the same >> options and compiler that was used with the pre-built ones. >> >> Hardware Version: Mac mini (Mid 2007) (Macmini2,1) >> Mac OS X 10.6.8 10K549 (Snow Leopard) >> Xcode 4.2 4C199 >> MacPorts Version: 2.3.4 >> >> Here's the error log, starting with the first command that failed: > >> :info:build drvconn.c:501: error: ‘liburl’ undeclared (first use in this >> function) > > This libiodbc build problem is being tracked in this ticket: > > https://trac.macports.org/ticket/51921 > > The buildbot machines are not special. They have MacPorts and Xcode installed > in the usual way, same as your system would. > > We do still create binaries of ports for Snow Leopard. They are built using > Xcode 3.2.6. Xcode 4.x on Snow Leopard can be problematic so I don't > recommend it. > >
As described in the ticket, it built fine with -x11. I removed the old inactive copies built with +x11, ran port rev-upgrade, and everything was clean, so I gather I should be ok. :-) _______________________________________________ macports-users mailing list macports-users@lists.macosforge.org https://lists.macosforge.org/mailman/listinfo/macports-users
