At Fri, 16 Mar 2007 17:50:33 +0800,
Nicolas Boichat wrote:
> 
> Hi,
> 
> I just got this input from a Macmini user (subsys id: 0x106b0800), after
> asking him to try different pins settings. (the sound doesn't work
> properly with a vanilla 2.6.21-rc3 kernel)
> 
> Tino Keitel wrote:
> > On Thu, Mar 15, 2007 at 18:12:30 +0800, Nicolas Boichat wrote:
> >
> > [...]
> >
> >   
> >> Considered it worked with the mactel patches, you should try
> >> STAC_MACBOOK_PRO_V1 first....
> >>     
> >
> > You are right, with STAC_MACBOOK_PRO_V1 I can use all required
> > features. Here are the results:
> >
> > - analog line in works, if "Line In as Output" is muted
> >
> > - analog line out works, it is controlled by  the "Front" channel in
> >   alsamixer
> >
> > - digital line out works
> >
> > - the internal speaker works, it is controlled by the "Master" channel
> >   in alsamixer
> >
> > - the internal speaker is silent if there is an analog plug in line out
> >
> > - the internal speker still works if a (optical) digital cable is
> >   plugged in line out, I guess because the optical plastic cable
> >   doesn't short circuit the line out plug
> >
> > Minor glitches:
> >
> > There is an input selector that has the options "Line", "Mic" and
> > "Front Mic". However, I think that only "Line" is really usable, as I
> > had so signal when I connected a Mic to line in and a "Front Mic" is
> > also not present in the mini.
> >
> > There is a "Mic as output" switch in alsamixer, but there is not "Mic"
> > jack.
> >   
> Considering these pins have been used for a long time on mactel-linux,

Grrr, someone should have informed us.  I didn't know of this.

> and that they are working fine with MacBook (1st generation at least),
> Macmini and Macbook Pro (1st generation only), I think the following
> patch is appropriate (please apply it after the patch sent yesterday).

But the glitches above don't appear on your macbook-pro-v1, right?
Then I suppose macmini requires slightly different pin configs for
inputs.  As for now, I think it's OK to use macbook-pro-v1 pin configs
for macmini since it's much better.  So, how about to just keep the
models and change the pin definitions to use the same table?


thanks,

Takashi

> 
> Best regards,
> 
> Nicolas
> 
> Fix audio on Macmini and Macbook.
> 
> Signed-off-by: Nicolas Boichat <[EMAIL PROTECTED]>
> 
> ---
> 
>  Documentation/sound/alsa/ALSA-Configuration.txt |    5 ++--
>  sound/pci/hda/patch_sigmatel.c                  |   27 
> +++++------------------
>  2 files changed, 8 insertions(+), 24 deletions(-)
> 
> diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt 
> b/Documentation/sound/alsa/ALSA-Configuration.txt
> index 438f3fe..c13885a 100644
> --- a/Documentation/sound/alsa/ALSA-Configuration.txt
> +++ b/Documentation/sound/alsa/ALSA-Configuration.txt
> @@ -904,9 +904,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. 
> This was removed.
>         ref           Reference board
>         3stack        D945 3stack
>         5stack        D945 5stack + SPDIF
> -       macmini       Intel Mac Mini
> -       macbook       Intel Mac Book
> -       macbook-pro-v1 Intel Mac Book Pro 1st generation
> +       mac           Intel Mac
> +                          (Mac Mini, Mac Book, Mac Book Pro 1st generation)
>         macbook-pro   Intel Mac Book Pro 2nd generation
>  
>       STAC9202/9250/9251
> diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
> index 2d78a9f..1293632 100644
> --- a/sound/pci/hda/patch_sigmatel.c
> +++ b/sound/pci/hda/patch_sigmatel.c
> @@ -58,9 +58,7 @@ enum {
>       STAC_D945_REF,
>       STAC_D945GTP3,
>       STAC_D945GTP5,
> -     STAC_MACMINI,
> -     STAC_MACBOOK,
> -     STAC_MACBOOK_PRO_V1,
> +     STAC_MAC,
>       STAC_MACBOOK_PRO_V2,
>       STAC_922X_MODELS
>  };
> @@ -524,13 +522,7 @@ static unsigned int d945gtp5_pin_configs[10] = {
>       0x02a19320, 0x40000100,
>  };
>  
> -static unsigned int macbook_pin_configs[10] = {
> -     0x0321e230, 0x03a1e020, 0x400000fd, 0x9017e110,
> -     0x400000fe, 0x0381e021, 0x1345e240, 0x13c5e22e,
> -     0x400000fc, 0x400000fb,
> -};
> -
> -static unsigned int macbook_pro_v1_pin_configs[10] = {
> +static unsigned int mac_pin_configs[10] = {
>       0x0321e230, 0x03a1e020, 0x9017e110, 0x01014010,
>       0x01a19021, 0x0381e021, 0x1345e240, 0x13c5e22e,
>       0x02a19320, 0x400000fb
> @@ -546,9 +538,7 @@ static unsigned int *stac922x_brd_tbl[STAC_922X_MODELS] = 
> {
>       [STAC_D945_REF] = ref922x_pin_configs,
>       [STAC_D945GTP3] = d945gtp3_pin_configs,
>       [STAC_D945GTP5] = d945gtp5_pin_configs,
> -     [STAC_MACMINI] = d945gtp5_pin_configs,
> -     [STAC_MACBOOK] = macbook_pin_configs,
> -     [STAC_MACBOOK_PRO_V1] = macbook_pro_v1_pin_configs,
> +     [STAC_MAC] = mac_pin_configs,
>       [STAC_MACBOOK_PRO_V2] = macbook_pro_v2_pin_configs,
>  };
>  
> @@ -556,9 +546,7 @@ static const char *stac922x_models[STAC_922X_MODELS] = {
>       [STAC_D945_REF] = "ref",
>       [STAC_D945GTP5] = "5stack",
>       [STAC_D945GTP3] = "3stack",
> -     [STAC_MACMINI]  = "macmini",
> -     [STAC_MACBOOK]  = "macbook",
> -     [STAC_MACBOOK_PRO_V1]   = "macbook-pro-v1",
> +     [STAC_MAC]      = "mac",
>       [STAC_MACBOOK_PRO_V2]   = "macbook-pro",
>  };
>  
> @@ -622,7 +610,7 @@ static struct snd_pci_quirk stac922x_cfg_tbl[] = {
>       /* other systems  */
>       /* Apple Mac Mini (early 2006) */
>       SND_PCI_QUIRK(0x8384, 0x7680,
> -                   "Mac Mini", STAC_MACMINI),
> +                   "Intel Mac", STAC_MAC),
>       {} /* terminator */
>  };
>  
> @@ -1893,16 +1881,13 @@ static int patch_stac922x(struct hda_codec *codec)
>       spec->board_config = snd_hda_check_board_config(codec, STAC_922X_MODELS,
>                                                       stac922x_models,
>                                                       stac922x_cfg_tbl);
> -     if (spec->board_config == STAC_MACMINI) {
> +     if (spec->board_config == STAC_MAC) {
>               spec->gpio_mute = 1;
>               /* Intel Macs have all same PCI SSID, so we need to check
>                * codec SSID to distinguish the exact models
>                */
>               printk(KERN_INFO "hda_codec: STAC922x, Apple subsys_id=%x\n", 
> codec->subsystem_id);
>               switch (codec->subsystem_id) {
> -             case 0x106b0200: /* MacBook Pro first generation */
> -                     spec->board_config = STAC_MACBOOK_PRO_V1;
> -                     break;
>               case 0x106b1e00: /* MacBook Pro second generation */
>                       spec->board_config = STAC_MACBOOK_PRO_V2;
>                       break;
> 
> 

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Mactel-linux-devel mailing list
Mactel-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mactel-linux-devel

Reply via email to