Thanks a million for this Kawal. Emrah On Mar 12, 2012, at 5:06 AM, Kawal Gucukoglu wrote:
> , hope those of you find this helpful and apologies to those who may have > seen this before! > > Kawal. > > > Begin forwarded message: > >> From: Paul Erkens <paul.erk...@gmail.com> >> Date: 17 September 2011 03:18:08 PM GMT+01:00 >> To: macvisionaries@googlegroups.com >> Subject: Re: Running a Mac with Windows on >> Reply-To: macvisionaries@googlegroups.com >> >> Hi Jeff, >> >> Here is the text you requested. >> --- >> Your first question, what to do about a non-existent insert key inside a >> virtual machine, is quite a story if you want to know the ins and outs. >> Along the way, we will get there. Here you go. >> >> First off, it is true that you have no insert key on the mac, while you >> often do need one in windows. You can create a key mapping for yourself in 1 >> of 2 ways. Either using fusion itself, and there is no real down side as far >> as I'm aware, but it is a little trickey to set up because of an interface >> issue in fusion. The other way to get an insert key is to use the sharp keys >> program. Sharp keys lets you remap a few more keys than fusion will allow. >> For example, using sharp keys, you can even remap your right command, or >> your right option key, to the windows insert. >> >> If you do it via fusion, then all your virtual machines willl get an insert >> key. If you have windows 7 and xp like I do, creating the insert key using >> the fusion keyboard remapper creates it for all virtual machines because >> fusion only allows you to do it inside its global preferences, command >> comma, and not on a per machine basis, command e. >> >> If you create your insert key using sharp keys, then it is going to be a >> local setting for that windows installation only, because sharp keys >> modifies the windows registry to do the trick. Both methods will give you >> the same result: an insert key that is not just insert, but that can be held >> down as if it were a modifier key for other keys. >> >> This answers your other issue, where capslock cannot be used inside the >> virtual machine as a modifier. It works as a caps lock, but you can't hold >> it down and press a letter inside the virtual machine, in order to give >> commands to your screen reader. Sharp keys and fusion itself though, will >> give you an insert key like the one on a normal windows computer. This lets >> you use insert rather than caps lock for your screen reader's commands, so >> let's concentrate on insert, and I will leave caps lock for someone else. >> >> Now, let's look at the way you can do it inside fusion. I'm using fusion >> 3.1.3, which is the latest version as of today. To update, go to the menu >> bar in fusion, vo m, then once right, then down to check for updates, and >> then follow the instructions. >> >> First, fire up fusion and, just to be certain, have your virtual machines >> shut down. Then press command comma to open fusion's global preferences. >> >> At the top of this window is a toolbar. Interact with it and click keyboard >> and mouse. A new window will appear. >> >> The first thing you will encounter is a pop up button where you choose your >> keyboard and mouse profile. The window itself consists of 4 tab sheets, and >> all those settings together are stored in a keyboard and mouse profile. I >> don't think we will ever need a second profile, but that's what the button >> allows. Leave it at its default. >> >> The first tab sheet of this dialog, named, key mappings, is where you can >> swap your windows logo and alt keys. By default, fusion will map your >> command key to the windows logo key, and your option key to the windows alt >> key. This is not very intuitive for those of us who are used to windows and >> its keyboard layout, but it's easy to swap them. See below. In this window, >> you will also be able to create your insert key inside fusion, and if you >> want, give yourself a num lock toggle as well. >> >> If you look at this table, then many mac keys are mapped to some windows >> counterparts. Personally, I don't think that is necessary at all. For >> example, in windows, you use control plus c to copy an item to the >> clipboard. On the mac, we're used to pressing command plus c to copy. In >> fusion, there is a default key mapping that makes command c the equivalent >> of control c. In other words, pressing control c or command c in windows >> will do the same thing. This is non-standard windows tweaking I don't like, >> so what I did to begin with, is clear this entire list. To the right of this >> table, you have 2 unlabeled buttons. The left one is add, and the right one >> is delete and entry in this table. Just focus on the right button of the 2, >> and hit vo space until the list is empty. You will also delete the undesired >> alt and windows logo key mappings this way. >> >> Now, you must create your own mappings, so that your mac command key will >> become the alt key in windows, and so that your option key can become your >> windows logo key inside windows. Here's how to do it. >> >> First, click add, to add a new mapping to the table. This is the left >> unlabeled button, to the right of the table. A new window appears, that you >> will later close with an ok button to return here. >> >> In the new window, you see your mac modifier keys with checkboxes, and a >> combo box for an additional key. For example, you will hear shift unchecked >> checkbox, and command, unchecked checkbox. In this case, where we want to >> map our option key to the windows logo key, we don't need the combo boxes in >> this dialog, so ignore them for now. Focus on the from, and the to, parts. >> >> We are mapping our option key to the windows logo key. In the from, area, >> tick the checkbox for the option key. Leave the rest in the from for what it >> is. Next, find the text that says, to. Here, you will find checkboxes for >> the windows counterparts of the mac key you are mapping. Now take care. One >> of those checkboxes will only say, checkbox, without a description like alt, >> or control. It is this unlabeled checkbox that we need to map our option key >> to. On the screen, this checkbox, in the to, field, is an icon with the >> windows logo key. So tick that box. Finally, proceed to the okay button and >> press it. You will return to the command comma, toolbar item keyboard and >> mouse screen, where you pressed the unlabeled add button. your first key >> mapping, is in place. Option is now windows logo as soon as the virtual >> windows machine is active. >> >> Now, repeat the same procedure for your alt key. So, click add, then in the >> from, field, tick command, then in the to, field, click alt, and press okay. >> >> Now that you know how to remap keys, you can do the same thing for your >> insert key. However, this is where it is a little tricky and you will soon >> understand why. >> >> As above, again click the add button in this dialog. Reminder: we came here >> by starting fusion, then command comma, then keyboard and mouse from the >> toolbar, then the first tab sheet named key mappings. >> >> After the remapper dialog with the from, and to, field, appears again, do >> the following to create your insert key. >> >> In the from, field, you need to choose which key on your keyboard is going >> to loose its function for windows, and act as your new insert key. Leave all >> the checkboxes for the modifier keys like shift, option etc alone, and focus >> on the combo box with voiceover. Once focus is on this field, assuming you >> have keyboard focus track your voiceover cursor, as is the voiceover >> default, then you can now input the key you wish. I use the accent key, just >> below escape on the mac keyboard. Press it, or press your own choice, and >> you will hear it spoken by voiceover. >> >> Of course, because this is a combo box, it does have a few presets, and you >> can reach them with vo space. However, once you do this, you cannot get out >> of the box anymore with vo right or anything, because that keystroke too, >> will be interpreted as the key combination you are going to map. So, my >> advice is not to go through the 13 presets of this combo. Instead, never >> open it and just type your desired insert key replacement, once the >> voiceover cursor and keyboard focus is on the combo box in the from, field. >> Don't open the combo, just type your key when the box is focused. >> >> Now, focus on the combo box of the to, field. This second combo box, you do >> need to open with vo space, because you need to select the item named >> insert. However, you should only walk to it with the voiceover cursor, and >> you should not press vo space. This is the oddity you need to be aware of. >> This is because if you press vo space on the insert item in the combo box, >> then vo space, as well as all subsequent keys, will be interpreted as the >> key you want to execute when you press accent, and you don't have a way to >> close the combo box to get to the okay button. >> >> So, after walking to the insert item with voiceover, and the to, combo box >> is still open, you must command tab away from fusion, to have os10 focus >> move out of the combo box. Depending on what you had open, you may land in >> the finder. Command tabbing away from fusion is the only keystroke I have >> found, to get you away from the combo box. Then, simply command tab back >> into fusion, and you will find that the combo box is now closed, and it is >> set to insert. >> >> Now, all you do is go to ok and click it. You will be returned to the key >> mapping dialog, where the list of keystrokes can be found. Now, you should >> have 3 mappings. One for command to become alt, one for option and windows >> logo, and a third for accent, that is now remapped to insert inside any >> fusion virtual machine. >> >> If you want to give yourself a num lock toggle, that can be achieved the >> same way you created your insert key. Let's say you want to toggled your num >> lock with control shift f12. So, first click add, then in the from, field, >> click, for example, the control and the shift box, go to the first combo, >> select f12, move to the second combo in the to, field, and select numlock >> from there. Again, don't forget to open the box, walk to numlock, command >> tab away and then back into fusion, and hit okay. >> This is what you need to do in the first tab sheet of the fusion keyboard >> and mouse dialog, and as I said, it was quite a story. >> >> We're not done yet. In the second tab sheet, named mouse shortcuts, you can >> tell fusion how you want to do a right click in windows. The mac only has a >> normal mouse click, and not a separate left and a right one, so by default, >> holding the control key and then pressing the mouse pad, a control click, >> will perform a right mouse click in windows, as if you pressed the secondary >> button. Nothing need to be changed here. Of course, you have your windows >> shift f10 key combination as the keyboard equivalent of the right mouse >> click. Furthermore, you can also create your own windows applications key, >> normally near your arrows on a windows keyboard, the same way you created >> your alt and windows keys above. >> >> The third tab sheet, named fusion shortcuts, can make life a lot easier for >> us, screenless folks. By default, if you're inside the virtual machine and >> you happen to hit f12, f11 or another magic mac key that does something >> under os10, then even if you are inside the vm, you will fly out of it, and >> land somewhere where you will need to turn on voiceover, command tab back >> into fusion, minimize windows with command control enter, move the voiceover >> cursor to where it says progress bar because that's where windows shows up >> minimized, turn off voice over with command f5, and finally enlarge windows >> back to normal with command control enter, the same keystroke used to >> minimize windows. A lot of work, and not funny if you discover that windows >> no longer talks and you don't know which key you hit by accident. >> >> So, what you do is, turn the checkbox off here that says: enable mac os >> keyboard shortcuts. Now, if you accidentally hit f12 or f11, it won't mess >> up things any longer. These keystrokes will instead be passed to windows, >> and no longer to os10 disturbing your windows experience. >> >> In the fourth tab sheet of this dialog, named fusion shortcuts, you can >> enable and disable a number of key combinations that you can press when the >> virtual windows machine is running, that affect fusion itself. You can mess >> with these because there is a friendly restore to defaults button as well. >> You will find a table here that you can interact with. On each line, a key >> combination is listed, along with a checkbox to enable it. Here's a few >> explained. >> >> Full screen. You need this keystroke, to make windows full screen when it is >> minimized. It is the control command enter to minimize and maximize windows, >> as already mentioned. Make sure you have this checked. >> There are nine others, and some of them I have turned off, for reasons >> explained below. >> >> Unity: this makes one space out of the windows desktop and the mac side. So >> far, I have never used it in daily work, because I can't figure out how it >> works. If you play with it and find out some benefits, please let us know. I >> have this off, to avoid accidentally dropping into unity. >> >> Also off are cycle through windows, and cycle through windows reverse. This >> is because we can easily do this with voiceover, and I don't want to loose >> keystrokes that may otherwise be used for jaws or NVDA commands. >> >> Next is hide application. I have this off as well, because if you're in the >> middle of a windows program and you want help, it is likely that you begin >> by pressing alt h to open the help menu. But watch out for this one, because >> if you don't turn off command h for the virtual machine, and remember that >> alt and command are now the same key, then instead of opening the help menu >> inside your windows program, you will instead hide fusion completely, and be >> dropped into os10 where you don't have speech for the moment unless you turn >> it on. I fell into this pit some 5 times until I realized what might be >> going on here. Turning this key combination off resolved the issue. Now, >> pressing alt h will nicely open the help menu in windows, and you will no >> longer be kicked out. >> >> Next, there is hide others. I have this off, because it does something to >> os10 where I have no speech as long as I'm inside windows, and you want to >> let windows get your keystrokes as much as possible. >> >> The same goes for settings, the next key to turn off, which in fusion is >> command e. I hear you thinking. Usually command comma is for settings. >> Correct. However, command comma in fusion opens the general preferences for >> all virtual machines and fusion, while command e, as in echo, opens the >> settings for your specific virtual machine. How many processor cores to >> allocate it, how much ram etc. So, if windows wants you to press alt e, then >> you don't want to speechlessly land into fusion settings. Rather, you want >> the alt e command to run in windows. Turn this off. >> >> The last key to turn of is command q for quit. Again, we don't have speech >> outside fusion so we can safely turn this off, so that command q, or alt q >> for windows, is available to windows and not to fusion or os10. >> >> If you want to use sharp keys instead, let me know. >> >> Hth, >> Paul. >> On Sep 5, 2011, at 9:47 AM, Hypnotic Consulting wrote: >> >>> Ditto, very much appreciated Paul. >>> Is anyone interested in doing a audio walk through? Or has anyone done one? >>> Jorge >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "MacVisionaries" group. >>> To post to this group, send email to macvisionaries@googlegroups.com. >>> To unsubscribe from this group, send email to >>> macvisionaries+unsubscr...@googlegroups.com. >>> For more options, visit this group at >>> http://groups.google.com/group/macvisionaries?hl=en. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "MacVisionaries" group. >> To post to this group, send email to macvisionaries@googlegroups.com. >> To unsubscribe from this group, send email to >> macvisionaries+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/macvisionaries?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To post to this group, send email to macvisionaries@googlegroups.com. > To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.