Hello,

You have set up a proper peer to peer network. There is no need to add a router 
into the mix. Macs are able to auto detect ethernet signals without the need of 
a crossover cable. Obviously, you can see that it works properly as you said 
you can see the shared disk on the other Mac.

You neglected to mention what the other Mac was, though, but I suspect you’ll 
find that the bottleneck is the USB drive. If you can try the initial time 
machine back up with the external hard drive directly connected to the other 
Mac, I think you’ll see the same time estimate. Alternatively, try a file 
duplication of about a 5 gig file on your mini and make an estimate from that 
best case test.

IF the other Mac is very old, it could be your ethernet is only 100 base T, and 
not Gigabit ethernet. That could be the other bottleneck. 
 
Regardless, the first time machine full back up is notoriously long.

Good luck.
—k


   

On Nov 4, 2012, at 10:21 AM, Ioana Gandrabur <[email protected]> wrote:

> Hello,
> 
> Are you saying that it is better to connect to the router rather than 
> connecting the cable directly between the two computers? Do you by any chance 
> know why that would be ? I just would like to understand this whole process 
> better.
> 
> Thank you for your help,
> 
> Ioana
> 
> Sent from my iPhone
> 
> On Nov 3, 2012, at 10:07 PM, "Dave" <[email protected]> wrote:
> 
>> Connect the two computers through the router.
>>  
>> Share the drive out to the network, then specify it as the backup for the 
>> second computer not connected directly to it.
>>  
>>  
>>  
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "MacVisionaries" group.
>> To post to this group, send email to [email protected].
>> To unsubscribe from this group, send email 
>> [email protected].
>> For more options, visit this group 
>> athttp://groups.google.com/group/macvisionaries?hl=en.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "MacVisionaries" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email 
> [email protected].
> For more options, visit this group 
> athttp://groups.google.com/group/macvisionaries?hl=en.

-- 
You received this message because you are subscribed to the Google Groups 
"MacVisionaries" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/macvisionaries.
For more options, visit https://groups.google.com/groups/opt_out.

Reply via email to