Hi,
On Sun, Jun 25, 2006 at 12:35:58PM +0200, Mathias Uebelacker wrote:
> is it possible, that the problems depends on the creation of a virtual
> memory on the MMC using the feature of the control panel?. Every time i
> would like to use this tool i got the message that the MMC is broken.
I've heard that swap might be a bit unstable in the beta.
Do you have a need to use swap?
- Eero
> grettings Mathias
>
> Am Donnerstag, den 22.06.2006, 13:33 +0300 schrieb Eero Tamminen:
> > Hi,
> >
> > On Wed, Jun 21, 2006 at 07:17:59PM +0200, Ramon Navarro Bosch wrote:
> > > I've removed battery, and now it doesn't reboot again. I doesn't have
> > > contact button on the left sidebar. I've tried df and I have enought
> > > space 50%. I'm not using swap. Can I debug this ?
> >
> > When the reboot happens?
> >
> > 1) before the bootup progressbar is shown,
> > -> most likely device HW watchdog reboots the device
> > because there was problem when mounting/writing to
> > the rootfs
> > 2) while the bootup progressbar is advancing, or
> > -> most likely device SW watchdog reboots the device because
> > there's a problem with some critical system service
> > (could also be reason 1)
> > 3) after Desktop has fully booted up
> > ???
> >
> > If 1), you can:
> > - use flasher to set device to boot from MMC. There's -b flasher
> > option to set kernel command line args, and AFAIK MMC is the
> > device /dev/mmcblk0p1. On the MMC you need /sbin/init (might
> > be script?) and environment that somehow allows you to type things.
> > Easiest to achieve latter would probably to have a "rescue fs"
> > that contains:
> > - busybox
> > - X server from the normal rootfs
> > - matchbox and xkbd/matchbox-keyboard
> > - xterm/rxtvt
> > - some debug tools (gdb, strace etc) so that you can debug
> > things after mounting the internal rootfs and chrooting
> > there
> > Would be nice if people on the list would get this together.
> > (I haven't tested this myself)
> >
> > If 2), you can:
> > - Set following flasher flags:
> > --enable-rd-mode --set-rd-flags no-lifeguard-reset --enable-usb-host-mode
> > This:
> > - disables device SW watchdog so that it's not rebooted
> > - allows you to establish USB serial connection to the device.
> > People on the list might have URLs to docs on how to do this
> >
> > If 3), debugging should be "piece of cake" ;-)
> >
> >
> >
> > > I thing that must be
> > > something with contact/email application because before reboot each time
> > > contact information on main screen finished to be writen.
> >
> >
> >
> > - Eero
> >
> > _______________________________________________
> > maemo-developers mailing list
> > [email protected]
> > https://maemo.org/mailman/listinfo/maemo-developers
>
_______________________________________________
maemo-developers mailing list
[email protected]
https://maemo.org/mailman/listinfo/maemo-developers
