On Wed, 2006-09-06 at 16:07 +0200, Rainer Dorsch wrote: > Am Dienstag, 5. September 2006 10:48 schrieb Miko Nieminen: > > If you upgrade system critical applications then you should disable > > lifeguard before that. This can be done with command > > "/path/to/flasher-2.0 --set-rd-flags=no-lifeguard-reset". After this you > > should run "apt-get upgrade" and reboot the device. > > Miko, > > do I set the no-lifeguard-reset flag while it is running? >
This is something you need to do at the desktop side. Connect your device to your desktop with USB cable and use flasher to disable this lifeguard. There are couple of wiki pages telling about flasher: http://maemo.org/maemowiki/Flasher_tool_usage http://maemo.org/maemowiki/RdMode You might want to try also "/path/to/flasher --help" and when running "/path/to/flasher-2.0 --set-rd-flags" without those actual flags you will get list of possible flags. > Is it cleared after reboot? > When you set these with flasher those are not cleared after reboot. If I remember correctly, R&D mode can be enable from device it self so that it will be cleared after reboot, but I don't remember how this can be done. > Is it required that the 770 is in rd-mode? > Right now I can't remember if you need to have rd-mode enabled to disable lifeguard reset and currently I can't test it, but maybe someone can confirm that. Sincerely, -- Miko Nieminen <[EMAIL PROTECTED]> _______________________________________________ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers
