On Friday, 3. November 2006 23:51, Detlef Schmicker wrote: > After hours of searching I found: > > newer linux kernels need a patch for flasher-2.0 > > please add a patched version for download > > from wiki:: > > A fix for this is to run the following command: > > perl -pi -e 's-/proc/bus/usb-/dev/bus/usb\000-;' -i.backup <flasher> > > where <flasher> is the location of your (already checked) flasher linux > binary. The original image will be backed up into flasher.backup.
Thanks Detlef, I had the very same issue on SuSE 10.1. The patch fixed the problem nicely. Maybe the problem should be addressed in the flasher binary. -Teemu > > > > Detlef > > Am Freitag, den 03.11.2006, 13:45 +0100 schrieb Detlef Schmicker: > > Hi, > > > > while trying to upgrade to new OS2006 version my nokia is not detected > > anymore. > > > > usb is working fine when device is running and I mount the device. > > > > but using the flasher procedure I do not get the device recognized: > > > > I followed the instructions from howto > > 770: Unplug charger and switch off the Nokia 770. Connect it to your > > computer via USB > > > > * PC: Execute as root (or as a normal user with rights to use the > > USB port): > > > > ./flasher-2.0 -F SU-18_2006SE_2.2006.39-14_PR_F5_MR0_ARM.bin -f > > -R > > > > * PC: "Suitable USB device not found, waiting" is displayed on the > > console > > > > * 770: Now plug in the charger to switch on the 770 or switch it > > on using the power button WHILE holding the Home-button > > > > * PC: Watch the messages as the image loads to the 770 after which > > it reboots automatically -- you're done now! > > > > but: > > sarge:/home/detlef# ./flasher-2.0 -F > > SU-18_2006SE_2.2006.39-14_PR_F5_MR0_ARM.bin -f -R > > flasher v0.8.1 (May 30 2006) > > > > SW version in image: SU-18_2006SE_2.2006.39-14_PR_MR0 > > Image 'kernel', size 1268864 bytes > > Version 2.6.16-200638osso1 > > Image 'initfs', size 1895680 bytes > > Version 0.76 > > Image 'rootfs', size 59899904 bytes > > Version NOKIA770_2006SE_2.2006.39-14_PR_MR0 > > Image '2nd', size 8704 bytes > > Version 0.9.14-5 > > Image 'xloader', size 13824 bytes > > Version 0.9.14-5 > > Image 'secondary', size 86912 bytes > > Version 0.9.14-5 > > Suitable USB device not found, waiting > > > > > > > > and nothing happens. The display shows the usb logo up right for a > > while, than battery charging. > > > > Any tips? > > > > Detlef _______________________________________________ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers
