On 3/2/06, Steve Johnson <[EMAIL PROTECTED]> wrote:
> Ok, spoke to our wireless guy, here is the info on the AP...
>
> The model is a Cisco Aironet 1242AG running firmware 12.3(7)JA. We
> are running only the G radio - Currently it is running wpa-psk for key
> management and allowing either tkip or aes for encryption.
>
> Here's a copy of the pertinent config:
>
> dot11 ssid busiss
> vlan 32
> authentication open
> authentication key-management wpa
> wpa-psk ascii 7 ************************
>
> encryption vlan 32 mode ciphers aes-ccm tkip
Ok got it to work, the box needed a reboot (The 770) once it rebooted
it, it came up and I got an IP from the DHCP server.. but.. then it
wouldn't pass data.. So next I did the advance option to only do WPA2,
and now it all works.. Traffic goes both ways.
Thanks for hearing me out on my issue =)
-Steve
--
"Knowing others is wisdom, knowing your self is Enlightenment."
-- Lao-Tzu
|C8H10N4O2|
_______________________________________________
maemo-users mailing list
[email protected]
https://maemo.org/mailman/listinfo/maemo-users
