Hi,
 
returning a unit running a 3rd party kernel and complaining that it does
not work as you expect on unsupported HW - this is a good one ;)
 
"IT-2007 supports 2 GB memory cards" - it is printed in the user manual
for a reason, though AFAIK the reason is not HW.
 
Br,
 
--jakub
 
 


________________________________

        From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of ext Kon Wilms
        Sent: 25 January, 2007 04:56
        To: maemo-users@maemo.org
        Subject: Re: [maemo-users] Card reader errors across multiple
devices - badN800 production line batche?
        
        
        Both, as well as the updated test kernel with SDHC support. All
have the same effect.
        
        Cheers
        Kon
        
        
        On 1/24/07, Jonathan Greene <[EMAIL PROTECTED]> wrote: 

                Just curious whether you are using the updated 2007
release or the one
                that comes installed in the box?
                
                On 1/24/07, Kon Wilms <[EMAIL PROTECTED]> wrote:
                > All,
                >
                > I purchased N800 #1 and tested a 'known to work' 4Gb
Transcend 150x SD
                > (non-HC) card on it.
                >
                > Formatting and then initializing with swap corrupted
the card. I dosfsck'd
                > it under Linux and the report was a corrupted header.
If I fix it and put it 
                > back in the N800 it is readable. The N800 is unable to
format it without
                > corrupting it.
                >
                > So I figured the N800 was maybe bad. I returned to
CompUSA who replaced it
                > with N800 #2. The new one has the same issue. 
                >
                > The kicker is that the last octet of the MAC address
differs by about 5. So
                > this leads me to believe that both of these were from
the same production
                > batch.
                >
                > The internal and external readers have the same
problems. 
                >
                > This card works without problems in a camera, garmin,
phone, 3 desktop and 1
                > laptop-integrated card readers (one being around 2
years old, the others
                > being newer).
                >
                > The device hw version on these two is 1301. 
                >
                > Has anyone else experienced this issue? Could we have
a h/w rev or faulty
                > batch of card readers here?
                >
                > Cheers
                > Kon
                >
                >
                > _______________________________________________ 
                > maemo-users mailing list
                > maemo-users@maemo.org
                > https://maemo.org/mailman/listinfo/maemo-users 
                >
                >
                >
                
                
                --
                Jonathan Greene
                m 917.560.3000
                AIM / iChat - atmasphere
                gtalk / jabber - [EMAIL PROTECTED]
                Gizmo - JonathanGreene
                blog - http://www.atmasphere.net/wp
                


_______________________________________________
maemo-users mailing list
maemo-users@maemo.org
https://maemo.org/mailman/listinfo/maemo-users

Reply via email to