Envoyé depuis mon HTC
----- Reply message ----- De : "Gary Montalbine" <[email protected]> Pour : "Mageia general discussions" <[email protected]> Objet : [Mageia-discuss] Gimp printing Date : sam., août 20, 2011 14:30 On 08/20/2011 07:35 AM, Gary Montalbine wrote: > > On 08/19/2011 11:09 PM, Balcaen John wrote: >> Le Vendredi 19 Août 2011 22:59:39 Gary Montalbine a écrit : >>> I mentioned previously that gimp and print assistant did not print the >>> image as shown in gimp. It was redder and darker. I went back to >>> ML2010.2 and colors match. When I reinstalled ML I was asked if I >>> wanted to install a proprietary driver for my video card. I said yes. >>> I don't remember seeing this in mageia. Would that make a difference >>> in my print quality? >> It should not make any difference to use a proprietary driver or not (but >> you can of course install one on Mageia if you want. >> >> Regarding printing maybe it's related to a misconfiguration of the >> printer (like a wrong color profile used ) >> >> Regards, > > I am strictly a user. Any printer setup has to be program related. I use > both MCC > printer and HP device manager to check it. I know nothing of > color profiles. The install program needs to do what is necessary to > make it work properly. At this point I am forced to stay with ML until I > have at least finished my printing. One other related printer problem in > Mageia is that when I turned the printer off the program tries to reboot > and freezes up. I have to either remove the usb plug or close my open > programs. > Thanks, Gary P.S. I noticed that the printed pictures in ML are slightly lighter that shown in Gimp. Is there some type of program that calibrates printer with monitor? Thanks, Gary
