A few days ago I posted about a MM install I was having some difficulty with. The list assisted and the problem was resolved, thanks! I completed my testing and went to deploy MM on a production server. I downloaded and compiled the source exactly the same on the production server as I had the testing server. Everything went fine, no errors, bin/check_perms says that all is good.
Using bin/newlist I created a new list and using the web interface configured it. When I try to post to the list I can see in the web logs where the alias file invokes the "/home/mailman/mail/wrapper post fei" but that is where it stops. None of the mailing list members ever get the message and I can find no other logs pointing to where the process died. I have compared this to my other install which works perfectly and can find no differences. If I su to mailman I can invoke a wrapper at the command prompt, i.e. ./wrapper post fei <sample.txt and it will work on the test machine but not on the production machine. The two machines are very nearly identical in most respects except underlying hardware. The production machine has dual cpus and hardware RAID whereas the test machine was an old box with an IDE drive. What should I be looking for and where? The logs folder shows nothing in errors, smtp show only the message sent to the list moderator and time of list creation, and subscribers show the two subscribers I am dealing with to get this working. Any other ideas? TIA! -- Regards, Timothy R. Robnett mailto:[EMAIL PROTECTED] http://www.robnett.net/~tim/ "Energy and persistence conquer all things." Benjamin Franklin ------------------------------------------------------ Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/
