Hmmm... Try this: create a test email message in a text file and pipe it to wrapper to see what happens.
=== TestMessage.txt === Received: from localhost by Bogus; Sun, 15 Dec 2002 11:10:09-0500 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: 15 Dec 2002 11:10:09-0500 Subject: Manual feed of email into list This is my test email's body === End of TestMessage.txt === Save this to a local text file, replace the "[EMAIL PROTECTED]" with your lists email address and then: su mailman cat TestMessage.txt | /var/lib/mailman/mail/wrapper post test2 If that works then there should be some files in ~mailman/qfiles/.. (or if the message is waiting for moderation in ~mailman/data/..). The Mailman logs should also have a record of the message being posted. If the message doesn't go out, and no logs are changed, and there are no waiting files that were created, then I suspect that you should start from ground zero. Re-install Python and Python-dev on your box then re-install Mailman. Good Luck - Jon Carnes. On Sun, 2002-12-15 at 00:35, Amrik Randhawa wrote: > Hi, thanks I already went through that before I posted to the list, still no > luck :-( > > Any other possible suggestions? > > Thanks for your help. > > On 13 Dec 2002 at 16:54, Jon Carnes wrote: > > > Hmmm, you should run through the steps in the FAQ 3.14 and see what > > turns up! > > > > On Fri, 2002-12-13 at 11:02, Amrik Randhawa wrote: > > > Oops, sorry, found them! I just tried to subscribe to the list again by > > > E-mail, however the mailman logs don't change at all. They only change when > > > I use the web-based subscription. Also when I try to post to the list > > > nothing changes in the mailman logs (none of the logs change -- I've > > > verified bounce, error, post, smtp, subscribe). Thanks again for your help! > > > > > > /AR > > > > > > > > > On 13 Dec 2002 at 7:08, Jon Carnes wrote: > > > > > > > Looks like its getting to the lists (or at least the wrapper). What > > > > do the Mailman logs show? > > > > > > > > Check out FAQ 3.14, and good Luck - Jon Carnes > > > > > > > > > > > > On Fri, 2002-12-13 at 02:06, Amrik Randhawa wrote: > > > > > Hello, > > > > > > > > > > I had mailman working on my old Mandrake system but have just done a > > > > > fresh install of Mandrake 9 and can't get it going again. > > > > > > > > > > Mail comes into my system just fine for regular users, however when I > > > > > mail to the list no list subscribers get a message and there is no error > > > > > message bounced back. Here's my mail info log line: > > > > > > > > > > Dec 13 01:57:33 list postfix/smtpd[11772]: connect from > > > > > unknown[000.00.0.00] Dec 13 01:57:33 list postfix/smtpd[11772]: > > > > > B809464B41: client=unknown[000.00.0.00] Dec 13 01:57:34 list > > > > > postfix/cleanup[11773]: B809464B41: message- > > > > > id=<[EMAIL PROTECTED]> Dec 13 01:57:34 list > > > > > postfix/nqmgr[11446]: B809464B41: from=<[EMAIL PROTECTED]>, size=467, > > > > > nrcpt=1 (queue active) Dec 13 01:57:34 list postfix/smtpd[11772]: > > > > > disconnect from unknown[209.68.2.48] Dec 12 22:57:34 list > > > > > postfix/local[11775]: B809464B41: to=<[EMAIL PROTECTED]>, > > > > > relay=local, delay=1, status=sent ("|/var/lib/mailman/mail/wrapper > > > > > post test2") > > > > > > > > > > > > > > > ** Note that I've replaced the IP that the message came from, from a > > > > > valid address to all zeros, and I've replaced my real server name with a > > > > > fake one, sorry. > > > > > > > > > > Same thing occurs when I try to send an E-mail to subscribe to the > > > > > list via. test2-request address, no message gets sent back, however when > > > > > I do it by the web-based interface I get a message just fine. > > > > > > > > > > Now this all has me thinking that there is something wrong with my > > > > > aliases file, here are the lines for the list: > > > > > > > > > > > > > > > test2: "|/var/lib/mailman/mail/wrapper post test2" > > > > > test2-admin: "|/var/lib/mailman/mail/wrapper mailowner > > > > > test2" test2-request: "|/var/lib/mailman/mail/wrapper mailcmd > > > > > test2" test2-owner: test2-admin > > > > > > > > > > > > > > > My configuration: > > > > > > > > > > Linux Mandrake 9.0 > > > > > Mailman 2.0.13-3mdk > > > > > Installed mailman by RPM > > > > > MTA is Postfix > > > > > > > > > > Any help would be greatly appreciated! > > > > > > > > > > ------------------------------------------------------ > > > > > Mailman-Users mailing list > > > > > [EMAIL PROTECTED] > > > > > http://mail.python.org/mailman/listinfo/mailman-users > > > > > Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py > > > > > Searchable Archives: > > > > > http://www.mail-archive.com/mailman-users%40python.org/ > > > > > > > > > > This message was sent to: [EMAIL PROTECTED] > > > > > Unsubscribe or change your options at > > > > > http://mail.python.org/mailman/options/mailman-users/jonc%40nc.rr.co m > > > > > > > > > > > > > > > > > > > > > > Regards, > > Amrik Randhawa <[EMAIL PROTECTED]> > PGP Key ID: 0x93657898 > > > ------------------------------------------------------ Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: archive@jab.org Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org