Don't forget to set the MTA = postfix in your mm_cfg.py if you go back to postfix. I am running RH 8 with MM 2.1.1 and Postfix 1.11-15. It is all working great on my main domain. I still have a "glitch" using virtual domains, which by the good graces of this list should be straightened out shortly.
> Yes, I did. > > The problem was SMTPHost and port was not in mm_cfg.py. > Once I added that everything started working. Dah! > > I also had to revert back to Sendmail rather than postfix. > I'm running 1.11 Postfix on a RH8.0 machine. When mailman is > running, Postfix processes e-mail and it just begins to slow > down. I stop postfix and mailman and fire it back up. It starts > to work and does the same thing all over. No errors in /var/log > no errors in the mailman logs either. The test list has one > member and general e-mail is light. There are no indications > that the processes hung, died or puked. It simply just stops > handling e-mail. Sendmail seems to work well. > > Mike > > > -----Original Message----- > From: Thomas Hillson [mailto:[EMAIL PROTECTED] > Sent: Monday, March 31, 2003 8:47 AM > To: mcobb; [EMAIL PROTECTED] Org > Subject: Re: [Mailman-Users] Mailman 2.1 setup problem > > > Mike. > > Did you finish going through the INSTALL document to copy the mailman > script to /etc/init.d and then run it. That starts the mailmanctl > application that passes email back to Postfix. You do not need the > wrapper as that is a sendmail app under the older Mailman. > > Make sure mailmanctl is running just run "ps -e" You will probably see > the mailmanctl and you > will definitely see the python daemons. > > > > At 5:29 PM -0800 3/27/03, mcobb wrote: >>Folks, >> >>I'm at whits end. I have spent all (probably because I'm an idiot) >> installing Mailman 2.1 on >>a RedHat 8.0 server. I'm running Postfix 1.11 and have done all the > config's >>via the Howto, >>Howdon'ts, pain and suffering guide etc. >> >>I created a list called test, and send e-mail to it. I get nothing not >> a smrsh failure nada, >>zip. I see the message in qfiles, and even in archives. But it NEVER >> send the e-mail to the >>alias users (me). The only thing I haven't done is config a link to the >> mailman wrapper. >>Why? It never says you have to for postfix. Also, /etc/smrsh dosent >> exist, /usr/sbin/smrsh >>does. I have installed everything using grp mailman and user mailman. I >> attahced the Defaults.py >>and the mm_cfg.py. I did add SMTPHOST and SMTPPORT. >> >>Any help greatly appreciated. >> >>Mike > > -- > --Tom ------------------------------------------------------ Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: [EMAIL PROTECTED] Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org
