On Wed, 2003-08-06 at 18:42, Kirk R. Wythers wrote: > I need to configure exim for a virtual domain. The uname of my machine > in lorax.forestry.umn.edu, the virtual domain that I want to run mailman > to/from is neighborsunited.net. > > Here is the exim log error: > 2003-08-06 12:14:53 remote host address is the local host: > neighborsunited.net (while verifying > <[EMAIL PROTECTED]> from > host localhost.forestry.umn.edu (lorax.forestry.umn.edu) [::1])
So you basically have an exim problem. You might well do better asking on the exim lists - see http://www.exim.org/mailman/listinfo > If I add the domain neighborsunited.net as the primary hostname, will > that take care of it? No. primary_hostname is whats used in the HELO lines and Received: tracking lines. > # primary_hostname = > primary_hostname = neighborsunited.net > > or do I also need something here? > > domainlist local_domains = @ > domainlist relay_to_domains = > hostlist relay_from_hosts = localhost > > Lastly, how does one HUP exim? Seriously, do you really feel you are an appropriate person to be connecting a mail system to a large, complex and hostile network of systems? You really need to have some idea of the fundamentals of internet mail before you start trying to run your own servers or mailing lists. BTW if you are running Mailman as a virtual under exim then normally you want things set roughly like this under exim:- * primary_hostname should not be set *unless* your machine does not know its own hostname (or the hostname does not agree with the DNS data for that IP) * local_domains may contain an @ (shorthand for $primary_hostname) but in general most systems to not have that. You would however have a list (colon separated) of the domains you accept (as a termination point - not a relay point) mail for. Your mailman domain should be listed here - but also see the Mailman howto in both the mailman distribution and on the exim web site. * Before starting your mail system up make damn sure things are configured appropriately for local delivery etc, otherwise you will lose local mail. * Before starting a mail server on an externally connected network make damn sure your ACL settings are sensible, otherwise you become an open relay. * Restart exim by sending the process a kill -HUP - ie kill -HUP `cat /var/run/exim.pid` alternatively use the system startup script to stop and restart it. Nigel. -- [ Nigel Metheringham [EMAIL PROTECTED] ] [ - Comments in this message are my own and not ITO opinion/policy - ] ------------------------------------------------------ Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: [EMAIL PROTECTED] Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org