Mailman version 2.1.2
in all tests:
Should Mailman filter the content of list traffic according to the settings below? is set to yes
Should Mailman convert text/html parts to plain text? is set to no.
Remove message attachments that have a matching content type = image
---- test one:
Remove message attachments that don't have a matching content type = multipart/mixed multipart/alternative text/plain text/html
this result in a plain text message. The headers show:
Content-Type: text/plain; charset="us-ascii"; format=flowed
But when the exact same message is sent with filtering off it shows:
Content-Type: multipart/mixed; ---- test two:
Remove message attachments that don't have a matching content type = blank field
this results in a plain text message, with the header: X-Content-Filtered-By: Mailman/MimeDel 2.1.2 ----
It appears that turning the filters on removes all html formatting regardless of how the filters are set. Is there a way around this?
<>< Paul
PS - my apologies if this comes through twice. Some 14 hours after the first send it had not shown, and I had no error back. No doubt posting it again will ensure the first one will make it too, while not posting again ensures the original will be forever lost.
------------------------------------------------------ Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/
This message was sent to: [EMAIL PROTECTED] Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org