At 1:41 AM +0200 2005-06-22, Jan Kohnert wrote: > Is it possible to tell mailman to deliver to the postfix instance, which > delivers finally? Something like adding the port of my final delivery > instance to the mailhost variable (mail.relay.tld:Port instead of > mail.relay.tld)?
The way this is typically done is by configuring the "external" postfix instance (the one that runs everything through AMaViS) to listen to the external IP addresses, and to have the "internal" postfix instance (the one that handles final delivery once the message has been scanned) on the "internal" IP addresses. Note that the IP address 127.0.0.1 is usually the "internal" IP address that is used, if all three processes are done on the same machine. This way, internally generated mail should be able to go out without needing to be scanned, while mail coming in will be scanned on inbound only. All that would change would be the IP address to which the particular postfix instance is listening, and not the port. -- Brad Knowles, <[EMAIL PROTECTED]> "Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety." -- Benjamin Franklin (1706-1790), reply of the Pennsylvania Assembly to the Governor, November 11, 1755 SAGE member since 1995. See <http://www.sage.org/> for more info. ------------------------------------------------------ Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ Unsubscribe: http://mail.python.org/mailman/options/mailman-users/archive%40jab.org Security Policy: http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq01.027.htp