On 03/13/2014 11:59 AM, Jacques Setton wrote: > > For example, in the below maillog trace we see that the memo initially > addressed to mysl...@domain.net by admin-eur...@waycast.eu is finally > delivered to the default account ad...@domain.net instead of being processed > by '/usr/lib/mailman/mail/mailman post mylist' as it should normally be the > case :
But we don't see why? Strangely enough, there is no Postfix log entry saying anything about the redirect from orig_to=<myl...@domain.net> to to=<ad...@domain.fr>. Also, there is a 2 and a half minute delay between receipt of the message and delivery (delays=0.1/0.01/60/90) of which 60 seconds is connection setup time including DNS, HELO and TLS; and 90 seconds is message transmission time. Does this seem OK? Anyway, this can occur if there is a virtual mapping from myl...@domain.net to ad...@domain.fr that is taking priority over /etc/mailman/virtual-mailman > - - - > [root@vps12345 ~]# more /usr/local/psa/var/log/maillog | grep 1A52911616E > > Mar 11 23:12:27 vps12345 postfix/smtpd[19763]: 1A52911616E: > client=relay6-d.mail.gandi.net[217.70.183.198] > > Mar 11 23:12:27 vps12345 postfix/cleanup[19767]: 1A52911616E: > message-id=<!&!AAAAAAAAAAAYAAAAAAAAAHqVdj4TMlNNnKyTMxcTrDTCgAAAEAAAABDlMhHAh > X9PqvkRNi1Uq10BAAAAAA==@waycast.eu> > > Mar 11 23:12:27 vps12345 postfix/qmgr[19671]: 1A52911616E: > from=<admin-eur...@waycast.eu>, size=17420, nrcpt=1 (queue active) > > Mar 11 23:14:57 vps129345 postfix/smtp[19770]: 1A52911616E: > to=<ad...@domain.fr>, orig_to=<myl...@domain.net>, > relay=mx1.ovh.net[213.186.33.29]:25, delay=150, delays=0.1/0.01/60/90, > dsn=2.0.0, status=sent (250 ok 1394576096 qp 28763) > > Mar 11 23:14:57 vps12345 postfix/qmgr[19671]: 1A52911616E: removed > > [root@vps12345 ~]# > > - - - > > Despite skimming through this Mailman-Users list and many other source > publications, I haven't yet been able to figure out the exact origin of this > abnormal behavior. Though I suspect a poorly defined Postfix 'transport' > specification (see item 7 further below), but this remains to be confirmed. The transport involved should be local. > Please note that I am using a hosted VPS running CentOS with, among other > things, Plesk, Postfix and Mailman. All software versions and configuration > details are communicated below. Another piece of useful information : the > 'ad...@domain.fr' default account has been specified at Plesk's web admin > interface level. See the FAQ at <http://wiki.list.org/display/DOC/Mailman+and+Plesk> > 2. Mailman Configuration File relevant excerpts (mm_cfg.py located in > /usr/lib/mailman/Mailman/) > > { . } > > DEFAULT_URL_HOST = 'lists.vps12345.ovh.net' > > DEFAULT_EMAIL_HOST = 'vps12345.ovh.net' > > MTA = 'Postfix' > > VIRTUAL_HOSTS.clear() > > add_virtualhost(DEFAULT_URL_HOST, DEFAULT_EMAIL_HOST) > > add_virtualhost('lists.domain.net', domain.net') > > POSTFIX_STYLE_VIRTUAL_DOMAINS = ['domain.net'] > > VIRTUAL_MAILMAN_LOCAL_DOMAIN = 'localhost' You may or may not need this, but if you do, you may need Mailman's bin/genaliases to update virtual-mailman. > 3. Mailman aliases set-up for sample list named 'mylist' (aliases and > aliases.db located in /etc/mailman/) OK > 4. Mailman virtual aliases set-up for sample list named 'mylist' > (virtual-mailman and virtual-mailman.db located in /etc/mailman/) > > # LOOP ADDRESSES START > > mailman-l...@domain.net mailman-loop > > # LOOP ADDRESSES END > > { .} > > # STANZA START: mylist > > # CREATED: Mon Feb 24 21:00:44 2014 > > myl...@domain.net mylist With VIRTUAL_MAILMAN_LOCAL_DOMAIN = 'localhost', these should be myl...@domain.net mylist@localhost and so on. > 5. Postfix Configuration File customized parameters (main.cf located in > /etc/postfix/) > > { .} > > # *** Added $mydomain and '$myorigin' to 'mydestination' parameter list > > mydestination = $myhostname, localhost.$mydomain, localhost.localdomain, > localhost, $mydomain, $myorigin > > # *** Redefine 'local_recipient_maps' parameter values > > local_recipient_maps = proxy:unix:passwd.byname $alias_maps > $virtual_alias_maps > > # *** Added Mailman 'aliases' reference in 'alias_maps' > > alias_maps = hash:/etc/aliases, hash:/var/spool/postfix/plesk/aliases, > hash:/etc/mailman/aliases > > # *** Uncommented 'recipient_delimiter' parameter setting > > recipient_delimiter = + > > # *** Added 'virtual-mailman' reference in 'virtual_alias_maps' > > virtual_alias_maps = $virtual_maps, hash:/var/spool/postfix/plesk/virtual, > hash:/etc/mailman/virtual-mailman virtual_alias_domains = domain.net > virtual_mailbox_domains = $virtual_mailbox_maps, > hash:/var/spool/postfix/plesk/virtual_domains > > virtual_mailbox_maps = , hash:/var/spool/postfix/plesk/vmailbox > > # *** Added Postfix Transport location to 'transport_maps' parameter Why? This is probably only for postfix_to_mailman. > transport_maps = , hash:/var/spool/postfix/plesk/transport, > hash:/etc/postfix/transport > > # *** Remainder of customized parameters follows below. > > smtpd_tls_cert_file = /etc./postfix/postfix_default.pem > > smtpd_tls_key_file = $smtpd_tls_cert_file > > smtpd_tls_security_level = may > > smtpd_use_tls = yes > > smtp_tls_security_level = may > > smtp_use_tls = no > > smtpd_timeout = 3600s > > smtpd_proxy_timeout = 3600s > > disable_vrfy_command = yes > > mynetworks = 127.0.0.0/8 [::1]/128 37.187.87.139/32, > hash:/var/spool/postfix/plesk-pop/poplock > > smtpd_sender_restrictions = check_sender_access > hash:/var/spool/postfix/plesk/blacklists, permit_sasl_authenticated, > check_client_access pcre:/var/spool/postfix/plesk/non_auth.re > > smtpd_client_restrictions = permit_mynetworks, permit_sasl_authenticated > > smtp_send_xforward_command = yes > > smtpd_authorized_xforward_hosts = 127.0.0.0/8 [::1]/128 > > smtpd_sasl_auth_enable = yes > > smtpd_recipient_restrictions = permit_mynetworks, check_client_access > pcre:/var/spool/postfix/plesk/no_relay.re, permit_sasl_authenticated, > reject_unauth_destination > > virtual_mailbox_base = /var/qmail/mailnames > > virtual_uid_maps = static:30 > > virtual_gid_maps = static:31 > > smtpd_milters = , inet:127.0.0.1:12768 > > non_smtpd_milters = , inet:127.0.0.1:12768 > > sender_dependent_default_transport_maps = > hash:/var/spool/postfix/plesk/sdd_transport_maps > > virtual_transport = plesk_virtual This makes plesk_virtual the transport for all virtual mailbox domains. > plesk_virtual_destination_recipient_limit = 1 > > mailman_destination_recipient_limit = 1 This is for postfix_to_mailman > mailbox_size_limit = 0 > > virtual_mailbox_limit = 0 > > myhostname = vps12345.ovh.net > > message_size_limit = 10240000 > > > > 6. Postfix Master Process Configuration File - Only uncommented lines > are shown (master.conf located in /etc/postfix) > > # ========================================================================== > > # service type private unpriv chroot wakeup maxproc command + args > > # (yes) (yes) (yes) (never) (100) > > # ========================================================================== > > smtp inet n - n - - smtpd > > pickup fifo n - n 60 1 pickup > > cleanup unix n - n - 0 cleanup > > qmgr fifo n - n 1 1 qmgr > > tlsmgr unix - - n 1000? 1 tlsmgr > > rewrite unix - - n - - trivial-rewrite > > bounce unix - - n - 0 bounce > > defer unix - - n - 0 bounce > > trace unix - - n - 0 bounce > > verify unix - - n - 1 verify > > flush unix n - n 1000? 0 flush > > proxymap unix - - n - - proxymap > > proxywrite unix - - n - 1 proxymap > > smtp unix - - n - - smtp > > relay unix - - n - - smtp > > -o smtp_fallback_relay= > > showq unix n - n - - showq > > error unix - - n - - error > > retry unix - - n - - error > > discard unix - - n - - discard > > local unix - n n - - local > > virtual unix - n n - - virtual > > lmtp unix - - n - - lmtp > > anvil unix - - n - 1 anvil > > scache unix - - n - 1 scache > > plesk_virtual unix - n n - - pipe flags=DORhu user=popuser:popuser > argv=/usr/lib64/plesk-9.0/postfix-local -f ${sender} -d ${recipient} -p > /var/qmail/mailnames > > mailman unix - n n - - pipe flags=R user=mailman:mailman > argv=/usr/lib64/plesk-9.0/postfix-mailman ${nexthop} ${user} ${recipient} > > plesk_saslauthd unix y y n - 1 plesk_saslauthd status=5 listen=6 > dbpath=/var/spool/postfix/plesk/passwd.db > > smtps inet n - n - - smtpd -o smtpd_tls_wrappermode=yes > > submission inet n - n - - smtpd -o smtpd_enforce_tls=yes -o > smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o > smtpd_client_restrictions=permit_sasl_authenticated,reject -o > smtpd_sender_restrictions= -o > smtpd_recipient_restrictions=permit_mynetworks,permit_sasl_authenticated,rej > ect_unauth_destination > > 37.187.87.139- unix - n n - - smtp -o smtp_bind_address=37.187.87.139 -o > smtp_bind_address6= -o smtp_address_preference=ipv4 > > Note : The 'postfix_to_mailman.py' scheme is NOT USED as the related lines > stayed commented out. OK, but why have all that baggage along anyway? > 7. Postfix Added Transport Table scheme (transport and transport.db > located in /etc/postfix/) > > The below-specified transports remained commented out because they cause a > transport failure when uncommented. It seems that the specifications used > are probably invalid. These will need to be reworked and we'd welcome > suggestions as to what to specify instead... See the FAQ at <http://wiki.list.org/x/EYDt>, in particular the paragraph postfix_to_mailman.py is an alternative to and is incompatible with Mailman delivery via aliases. If you are configuring both Mailman aliases and postfix_to_mailman.py, you are making a mistake. > { .} > > # *** ADDED TRANSPORT(5) > > # vps12345.ovh.net mailman: > > # domain.net mailman: -- Mark Sapiro <m...@msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan ------------------------------------------------------ Mailman-Users mailing list Mailman-Users@python.org https://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://wiki.list.org/x/AgA3 Security Policy: http://wiki.list.org/x/QIA9 Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ Unsubscribe: https://mail.python.org/mailman/options/mailman-users/archive%40jab.org
