ok Nicole thanks for the info but I am really new at this so how would I set
my default play bac device in my system and to what do I have to set it to
my default is speakers high definition audio device hope you can help me
thanks and thanks for your response you have been a great help
----- Original Message -----
From: "Nicole Massey" <[email protected]>
To: "QWS list" <[email protected]>
Sent: Wednesday, July 01, 2015 8:50 PM
Subject: RE: QWS List some questions
No, you don't have to have a MIDI interface to use QWS. But note that you
do
need to set the default playback device correctly in your system settings
to
get the same results outside of QWS.
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
mike hall
Sent: Wednesday, July 01, 2015 7:46 PM
To: QWS list
Subject: Re: QWS List some questionns
hello. I have a couple of questions as well. first of all do you have
to have a midi interface box like the midisport to use qws or can you
set your computer up as a host as of now I have my Yamaha keyboard
connected to my computer with a u s b cable and my keyboard is the
host. and when I record tracks I can hear my tracks through my head
phones connect to my keyboard.
but if I save the file after I am done I can't play it cause it sounds
so wrong lol. so that is why I am wondering if you have to have a box
as a host
or is there another I can do this without using a box hope someone
can
help me with this thanks
----- Original Message -----
From: "John Sanfilippo" <[email protected]>
To: "QWS list" <[email protected]>
Sent: Wednesday, July 01, 2015 6:52 PM
Subject: Re: QWS List some questionns
> I'm not quite certain of what you are asking, but one thing you might
> try is setting the volume of every track to 100 or 127. I found that
> when I set track volumes, the next time I opened an otherwise empty
> qws midi file, it remembered the other track and instrument settings.
>
> Just a wild guess. It can't hurt to try.
>
> js
>
>
> ----- Original Message -----
> From: "Joe Giovanelli" <[email protected]>
> To: "QWS list" <[email protected]>
> Sent: Wednesday, July 1, 2015 16:02
> Subject: QWS List some questionns
>
>
>> Hello List Members,
>>
>> I have a couple of questions.
>>
>> I have created a sequence and edited it to my satisfaction. Although
>> it plays properly through QWS, it does not play correctly when the
>> sequence is transferred to another instrument which does not involve
QWS.
>>
>> The initial setting for each track were done using the track
properties.
>>
>> It appears that QWS "knows" what I intended but this info is not
>> transmitted to other equipment.
>>
>> How do I get the right settings written directly to my sequence?
>>
>> I probably have other questions but perhaps this is enough for this
>> round.
>>
>> Thank you for reading this.
>>
>> Joe Giovanelli
>> To unsubscribe or change list options, see
>> http://lists.andrelouis.com
>>
>> for archived list posts, see
>> http://www.mail-archive.com/[email protected]
>
> To unsubscribe or change list options, see
http://lists.andrelouis.com
>
> for archived list posts, see
> http://www.mail-archive.com/[email protected]
>
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see http://www.mail-
archive.com/[email protected]
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see
http://www.mail-archive.com/[email protected]
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see http://www.mail-archive.com/[email protected]
