Hi Joe,
Just to clarify then:
In the Options -> Ports dialog, there you find the complete list of ports
and you can select whether QWS will interact with this port. The "Use this
port" checkbox for *every* port is whether QWS will make use of this port.
it does not set the default.
To set the default port that QWS will use when creating or loading a track,
go into Options -> General Options. There you will find a list called
Preferred MIDI device. This is probably still set to the Microsoft GS in
your case.
The other thing to add is that when you save a MIDI file, QWS will save away
which ports you have selected for each track.
I hope this helps.
With best regards,
James.
----- Original Message -----
From: "Joe Giovanelli" <[email protected]>
To: "QWS list" <[email protected]>
Sent: Saturday, August 15, 2015 3:55 PM
Subject: QWS List use this port
Hi,
After going to the Options menu and selecting Port, I locate the port I
wish to be the default. I go to the box and check that this is indeed my
default port.
I open a file and it plays in GS Wavetable.
The only way to play it properly is to select each track and set its port
to the default.
Instead, shouldn't the file automatically play using my checked, default
port?
Thanks for your thoughts.
Joe Giovanelli
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see
http://www.mail-archive.com/[email protected]
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see http://www.mail-archive.com/[email protected]
