QWs doesn't assume anything with MIDI data, so when you go to the end of the
track it'll paste things exactly where the prior one stopped. This means
that if your chords ended on beat 3 of a 4/4 measure then the paste will
start on beat 4, and if you lingered over to beat 1 then the next start of
the progression will start on beat 2. This is actually a very good thing, as
it gives you more control over what you're doing, and gives you a clearer
understanding of just what the MIDI is doing.
To be sure you're pasting in the right spot, check your marker position
before you paste. In Jaws it's Insert+Page Down, and others can tell you
what it is for NVDA or WindowEyes or another screen reader. Also practice a
bit of cleanup. Hit the end key for your track and check your position as
mentioned above, and if it's not an even multiple of your time signature
then you may need to clean it up a bit.
For example, you go to your track and press end, then check your position.
The program tells you that you're on Beat 33. You don't want this, as you're
playing in 4/4 time. Hit the left arrow once. Your position marker should
tell you you're now on beat 32. Press Control+End to select the remainder of
the track, then press delete. Now press end and you should be at beat 32.
Very Important: Listen to the progression before performing any operation,
as if it's done something funky to your track you can't undo it if you've
done anything else. But if it's okay then you're ready to start copying your
track.
If your track is short a beat, then copy it to the clipboard, press the End
key, (not required, but it helps peace of mind) then press the right arrow
once. That should put you on the right beat where you can paste. Remember to
use the right arrow each time you copy the progression, as it's a beat short
and you need to account for that.

> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On Behalf Of
> Sharni-Lee Ward
> Sent: Wednesday, October 28, 2015 11:27 PM
> To: QWS list
> Subject: QWS List Having Trouble with copy/pasting
> 
> Hi,
> 
> I'm making a song and want to copy the same progression of chords
> several times to save the trouble of playing them over and over during
> the recording. However, every time I try and select the sixteen bars
> worth of chords, either by pausing at the desired position to set the
> Right marker or by going to it with the "Go To" command (the Left one's
> always at the beginning), then selecting the marked portion and
> copy/pasting it, the pasted part is always slightly off-beat and I
> don't know how to edit events or notes or whatever to smooth it out. If
> anyone could help, I'd sincerely appreciate it.

To unsubscribe or change list options, see http://lists.andrelouis.com

for archived list posts, see http://www.mail-archive.com/[email protected]

Reply via email to