Different sound sources will give you different roll responses, so you need to play with it. Turn on the metronome on a blank project and insert a track and set it to your drum channel. Start recording and play one snare note on each click of the metronome for an eight measure range. (32 beats in 4/4) Now go into the time expand function and enter 25 in the percentage box. This should give you a roll with sixteenth notes. Check it, and if it sounds right then you're good, otherwise do it again and use a value of 66. This should sound fine but may be a bit machine gun sounding. Try other values to get a feel for what works with your sound source. Once you've got the roll sounding how you want it trim it to cover the time you need it to, copying and pasting if you need to to make it fit your roll range. Then play the rolls several times, changing the volume in the properties to get a feel for how loud you want it and how soft you want it. Remember these numbers. Now go back to your normal volume, and use the progression tool on it to span a change in velocity (check the manual for the number for this) from your low value to your high value, and this should give you the increasing sound of a press roll. Remember to add a full volume strike at the end to punctuate the roll, as this is something most traditional drummers can't keep from doing as it's so idiomatic of the sound. Hope this helps.
> -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of > Sharni-Lee Ward > Sent: Friday, October 30, 2015 8:55 PM > To: QWS list > Subject: QWS List Making a Drum Roll > > Hi, > > I'm trying to hand-make a drum roll but my first attempt didn't turn > out the way I wanted it to. I used the Event list and it took a while > because I was moving each strike eight tics ahead of the last one. I > figure that's too close together but halving that amount (I used the > Init Time feature to test this) makes it too choppy. I want a nice roll > but I can't play it by hand. There must be a way to do it, though-I've > heard it in other midi files. I'm guessing there's a controler involved > to make it start soft and build in volume, but I don't know how to > properly use controlers yet, ahaha. To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
