Hi Adrian; we try to avoid top-posting on mailing lists: instead of including the entire email you're replying to and then writing your response at the top, please try to include only the parts of the message that are relevant for your reply and intersperse your response appropriately.
The complete thread is archived on the mailing list server, so there's no need to including the entire thing again in every message, and even today there are many people who have limited or costly internet access. Thanks! On Wed, 2016-06-22 at 17:44 +0000, Adrian Muresan wrote: > This is an interesting data-point. > I used make 3.81 directly from SourceForge and it also failed with > same error. > > C:\Users\mureadr\Desktop\A\HMI_FORGF\bld\armle- > v7\release\fordhmi>"C:\GnuWin32\bin\make.exe" deploy_marketProperties > --debug=vjm --print-data-base > 381-SForge.err 2>&1 > See 381-SForge.err > > But when I used the 3.81 that comes with the QNX SDK, it works fine So clearly the QNX version of GNU make is not a simple build using all the default configuration. Since GNU make is under the GPL, the QNX folks must provide any changes they made to it on request. My suspicion is that, as Eli suggested, they have enabled the BATCH_MODE_ONLY_SHELL parameter in their config.h. You should clear your build, make that change to your config.h to enable that, rebuild, and see if that version behaves as you expect. _______________________________________________ Make-w32 mailing list Make-w32@gnu.org https://lists.gnu.org/mailman/listinfo/make-w32