The following makefile represents problems I have been having with makemaker.
# This Makefile is for the Digest::MD5 extension to perl.
#
# It was generated automatically by MakeMaker version
# 6.03 (Revision: 1.63) from the contents of
# Makefile.PL. Don't edit this file, edit Makefile.PL instead.
#
# ANY CHANGES MADE HERE WILL BE LOST!
#
# MakeMaker ARGV: (q[-v])
#
# MakeMaker Parameters:
# DEFINE => q[-DU32_ALIGNMENT_REQUIRED]
# INSTALLDIRS => q[perl]
# NAME => q[Digest::MD5]
# PREREQ_PM => { File::Spec=>q[0], Digest::base=>q[1.00] }
# VERSION_FROM => q[MD5.pm]
# dist => { COMPRESS=>q[gzip -9f], SUFFIX=>q[gz] }
# --- MakeMaker post_initialize section:
# --- MakeMaker const_config section:
# These definitions are from config.sh (via /usr/lib/perl5/5.8.0/i386-linux/Config.pm)
# They may have been overridden via Makefile.PL or on the command line
AR = ar
CC = gcc
CCCDLFLAGS = -fPIC
CCDLFLAGS = -rdynamic -Wl,-rpath,/usr/lib/perl5/5.8.0/i386-linux/CORE
DLEXT = so
DLSRC = dl_dlopen.xs
LD = gcc
LDDLFLAGS = -shared -L/usr/local/lib
LDFLAGS = -L/usr/local/lib
LIBC = /lib/libc-2.3.2.so
LIB_EXT = .a'
libc='
OBJ_EXT = ub
OSNAME = linux
OSVERS = 2.4.20-30.9
RANLIB = _
SO = so
EXE_EXT =
FULL_AR = /usr/bin/ar
# --- MakeMaker constants section:
AR_STATIC_ARGS = cr
NAME = Digest::MD5
DISTNAME = Digest-MD5
NAME_SYM = Digest_MD5
VERSION = 2.33
VERSION_SYM = 2_33
XS_VERSION = 2.33
INST_ARCHLIB = blib/arch
INST_SCRIPT = blib/script
INST_BIN = blib/bin
INST_LIB = blib/lib
INSTALLDIRS = perl
PREFIX = /usr
SITEPREFIX = /usr
VENDORPREFIX = 1 '
INSTALLPRIVLIB = /usr/lib/perl5/5.8.0
INSTALLSITELIB = /usr/lib/perl5/site_perl/5.8.0'
installsiteman1='/usr/share/man/man1'
installsiteman3='/usr/share/man/man3'
installsitescript='/usr/bin'
installstyle='lib/perl5'
installusrbinperl='define'
installvendorarch='/usr/lib/perl5/vendor_perl/5.8.0/i386-linux'
installvendorbin='/usr/bin'
installvendorhtml1=''
installvendorhtml3=''
installvendorlib='/usr/lib/perl5/vendor_perl/5.8.0'
installven
INSTALLVENDORLIB = stallstyle='lib/perl5'
installus
INSTALLARCHLIB = /usr/lib/perl5/5.8.0/i386-linux
INSTALLSITEARCH = /usr/lib/perl5/site_perl
INSTALLVENDORARCH =
INSTALLBIN = /usr/bin'
installhtml1dir=''
installhtml3dir='
INSTALLSITEBIN = /usr
INSTALLVENDORBIN = /usr/bin'
installvendorhtml1=''
installven
INSTALLSCRIPT = /usr/bin
PERL_LIB = /usr/lib/perl5/5.8.0
PERL_ARCHLIB = /usr/lib/perl5/5.8.0/i386-linux
SITELIBEXP = '/usr/lib/perl5/site_perl'
sit
SITEARCHEXP = /usr/lib/pe
LIBPERL_A = libperl.a'
libc='
FIRST_MAKEFILE = Makefile
MAKE_APERL_FILE = Makefile.aperl
PERLMAINCC = $(CC)
PERL_INC = /usr/lib/perl5/5.8.0/i386-linux/CORE
PERL = /usr/bin/perl
FULLPERL = /usr/bin/perl
PERLRUN = $(PERL)
FULLPERLRUN = $(FULLPERL)
PERLRUNINST = $(PERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
FULLPERLRUNINST = $(FULLPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
ABSPERL = $(PERL)
ABSPERLRUN = $(ABSPERL)
ABSPERLRUNINST = $(ABSPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
FULL_AR = /usr/bin/ar
PERL_CORE = 0
NOOP = $(SHELL) -c true
NOECHO = @
VERSION_MACRO = VERSION
DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\"
XS_VERSION_MACRO = XS_VERSION
XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\"
PERL_MALLOC_DEF = -DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc -Dfree=Perl_mfree
-Drealloc=Perl_realloc -Dcalloc=Perl_calloc
MAKEMAKER = /usr/lib/perl5/5.8.0/ExtUtils/MakeMaker.pm
MM_VERSION = 6.03
# FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle).
# BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle)
# PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar)
# DLBASE = Basename part of dynamic library. May be just equal BASEEXT.
FULLEXT = Digest/MD5
BASEEXT = MD5
PARENT_NAME = Digest
DLBASE = $(BASEEXT)
VERSION_FROM = MD5.pm
DEFINE = -DU32_ALIGNMENT_REQUIRED
OBJECT = $(BASEEXT)$(OBJ_EXT)
LDFROM = $(OBJECT)
LINKTYPE = dynamic
# Handy lists of source code files:
XS_FILES= MD5.xs
C_FILES = MD5.c
O_FILES = MD5ub
H_FILES =
MAN1PODS =
MAN3PODS = MD5.pm
INST_MAN1DIR = blib/man1
MAN1EXT =
INSTALLMAN1DIR = /usr/share/man/man1
INSTALLSITEMAN1DIR = /usr/share/man/man1
INSTALLVENDORMAN1DIR = 1 '
/share/man/man1
INST_MAN3DIR = blib/man3
MAN3EXT = 3pm
INSTALLMAN3DIR = /usr/share/man/man3
INSTALLSITEMAN3DIR = /usr/share/man/man3
INSTALLVENDORMAN3DIR = 1 '
/share/man/man3
PERM_RW = 644
PERM_RWX = 755
# work around a famous dec-osf make(1) feature(?):
makemakerdflt: all
.SUFFIXES: .xs .c .C .cpp .i .s .cxx .cc $(OBJ_EXT)
# Nick wanted to get rid of .PRECIOUS. I don't remember why. I seem to recall, that
# some make implementations will delete the Makefile when we rebuild it. Because
# we call false(1) when we rebuild it. So make(1) is not completely wrong when it
# does so. Our milage may vary.
# .PRECIOUS: Makefile # seems to be not necessary anymore
.PHONY: all config static dynamic test linkext manifest
# Where is the Config information that we are using/depend on
CONFIGDEP = $(PERL_ARCHLIB)/Config.pm $(PERL_INC)/config.h
# Where to put things:
INST_LIBDIR = $(INST_LIB)/Digest
INST_ARCHLIBDIR = $(INST_ARCHLIB)/Digest
INST_AUTODIR = $(INST_LIB)/auto/$(FULLEXT)
INST_ARCHAUTODIR = $(INST_ARCHLIB)/auto/$(FULLEXT)
INST_STATIC = $(INST_ARCHAUTODIR)/$(BASEEXT)$(LIB_EXT)
INST_DYNAMIC = $(INST_ARCHAUTODIR)/$(DLBASE).$(DLEXT)
INST_BOOT = $(INST_ARCHAUTODIR)/$(BASEEXT).bs
EXPORT_LIST =
PERL_ARCHIVE =
PERL_ARCHIVE_AFTER =
TO_INST_PM = MD5.pm
PM_TO_BLIB = MD5.pm \
blib/lib/Digest/MD5.pm
# --- MakeMaker tool_autosplit section:
# Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto
AUTOSPLITFILE = $(PERLRUN) -e 'use AutoSplit; autosplit($$ARGV[0], $$ARGV[1], 0, 1,
1) ;'
# --- MakeMaker tool_xsubpp section:
XSUBPPDIR = /usr/lib/perl5/5.8.0/ExtUtils
XSUBPP = $(XSUBPPDIR)/xsubpp
XSPROTOARG =
XSUBPPDEPS = $(XSUBPPDIR)/typemap typemap $(XSUBPP)
XSUBPPARGS = -typemap $(XSUBPPDIR)/typemap -typemap typemap
XSUBPP_EXTRA_ARGS =
# --- MakeMaker tools_other section:
SHELL = /bin/sh'
shar=
CHMOD = chmod
CP = cp
LD = gcc
MV = mv
NOOP = $(SHELL) -c true
RM_F = rm -f
RM_RF = rm -rf
TEST_F = test -f
TOUCH = touch
UMASK_NULL = umask 0
DEV_NULL = > /dev/null 2>&1
# The following is a portable way to say mkdir -p
# To see which directories are created, change the if 0 to if 1
MKPATH = $(PERLRUN) "-MExtUtils::Command" -e mkpath
# This helps us to minimize the effect of the .exists files A yet
# better solution would be to have a stable file in the perl
# distribution with a timestamp of zero. But this solution doesn't
# need any changes to the core distribution and works with older perls
EQUALIZE_TIMESTAMP = $(PERLRUN) "-MExtUtils::Command" -e eqtime
# Here we warn users that an old packlist file was found somewhere,
# and that they should call some uninstall routine
WARN_IF_OLD_PACKLIST = $(PERL) -we 'exit unless -f $$ARGV[0];' \
-e 'print "WARNING: I have found an old package in\n";' \
-e 'print "\t$$ARGV[0].\n";' \
-e 'print "Please make sure the two installations are not conflicting\n";'
UNINST=0
VERBINST=0
MOD_INSTALL = $(PERL) "-I$(INST_LIB)" "-I$(PERL_LIB)" "-MExtUtils::Install" \
-e "install([EMAIL PROTECTED],'$(VERBINST)',0,'$(UNINST)');"
DOC_INSTALL = $(PERL) -e '$$\="\n\n";' \
-e 'print "=head2 ", scalar(localtime), ": C<", shift, ">", " L<", $$arg=shift, "|",
$$arg, ">";' \
-e 'print "=over 4";' \
-e 'while (defined($$key = shift) and defined($$val = shift)){print "=item *";print
"C<$$key: $$val>";}' \
-e 'print "=back";'
UNINSTALL = $(PERLRUN) "-MExtUtils::Install" \
-e 'uninstall($$ARGV[0],1,1); print "\nUninstall is deprecated. Please check the";' \
-e 'print " packlist above carefully.\n There may be errors. Remove the";' \
-e 'print " appropriate files manually.\n Sorry for the inconveniences.\n"'
# --- MakeMaker dist section:
ZIPFLAGS = -r
TO_UNIX = @$(NOOP)
TAR = tar
POSTOP = @$(NOOP)
ZIP = zip
DIST_DEFAULT = tardist
CI = ci -u
SHAR = shar
COMPRESS = gzip -9f
DIST_CP = best
PREOP = @$(NOOP)
TARFLAGS = cvf
DISTVNAME = $(DISTNAME)-$(VERSION)
SUFFIX = gz
RCS_LABEL = rcs -Nv$(VERSION_SYM): -q
# --- MakeMaker macro section:
# --- MakeMaker depend section:
# --- MakeMaker cflags section:
CCFLAGS = -DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm
OPTIMIZE =
PERLTYPE =
MPOLLUTE =
# --- MakeMaker const_loadlibs section:
# Digest::MD5 might depend on some other libraries:
# See ExtUtils::Liblist for details
#
LD_RUN_PATH =
# --- MakeMaker const_cccmd section:
CCCMD = $(CC) -c $(PASTHRU_INC) $(INC) \
$(CCFLAGS) $(OPTIMIZE) \
$(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \
$(XS_DEFINE_VERSION)
# --- MakeMaker post_constants section:
# --- MakeMaker pasthru section:
PASTHRU = LIB="$(LIB)"\
LIBPERL_A="$(LIBPERL_A)"\
LINKTYPE="$(LINKTYPE)"\
PREFIX="$(PREFIX)"\
OPTIMIZE="$(OPTIMIZE)"\
PASTHRU_DEFINE="$(PASTHRU_DEFINE)"\
PASTHRU_INC="$(PASTHRU_INC)"
# --- MakeMaker c_o section:
.c.i:
gcc -E -c $(PASTHRU_INC) $(INC) \
$(CCFLAGS) $(OPTIMIZE) \
$(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \
$(XS_DEFINE_VERSION) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE)
$*.c > $*.i
.c.s:
$(CCCMD) -S $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c
.c$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c
.C$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.C
.cpp$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cpp
.cxx$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cxx
.cc$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cc
# --- MakeMaker xs_c section:
.xs.c:
$(PERLRUN) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS) $(XSUBPP_EXTRA_ARGS) $*.xs >
$*.xsc && $(MV) $*.xsc $*.c
# --- MakeMaker xs_o section:
.xs$(OBJ_EXT):
$(PERLRUN) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS) $*.xs > $*.xsc && $(MV)
$*.xsc $*.c
$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c
# --- MakeMaker top_targets section:
all :: pure_all manifypods
@$(NOOP)
pure_all :: config pm_to_blib subdirs linkext
@$(NOOP)
subdirs :: $(MYEXTLIB)
@$(NOOP)
config :: Makefile $(INST_LIBDIR)/.exists
@$(NOOP)
config :: $(INST_ARCHAUTODIR)/.exists
@$(NOOP)
config :: $(INST_AUTODIR)/.exists
@$(NOOP)
$(INST_AUTODIR)/.exists :: /usr/lib/perl5/5.8.0/i386-linux/CORE/perl.h
@$(MKPATH) $(INST_AUTODIR)
@$(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.0/i386-linux/CORE/perl.h
$(INST_AUTODIR)/.exists
[EMAIL PROTECTED](CHMOD) $(PERM_RWX) $(INST_AUTODIR)
$(INST_LIBDIR)/.exists :: /usr/lib/perl5/5.8.0/i386-linux/CORE/perl.h
@$(MKPATH) $(INST_LIBDIR)
@$(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.0/i386-linux/CORE/perl.h
$(INST_LIBDIR)/.exists
[EMAIL PROTECTED](CHMOD) $(PERM_RWX) $(INST_LIBDIR)
$(INST_ARCHAUTODIR)/.exists :: /usr/lib/perl5/5.8.0/i386-linux/CORE/perl.h
@$(MKPATH) $(INST_ARCHAUTODIR)
@$(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.0/i386-linux/CORE/perl.h
$(INST_ARCHAUTODIR)/.exists
[EMAIL PROTECTED](CHMOD) $(PERM_RWX) $(INST_ARCHAUTODIR)
config :: $(INST_MAN3DIR)/.exists
@$(NOOP)
$(INST_MAN3DIR)/.exists :: /usr/lib/perl5/5.8.0/i386-linux/CORE/perl.h
@$(MKPATH) $(INST_MAN3DIR)
@$(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.0/i386-linux/CORE/perl.h
$(INST_MAN3DIR)/.exists
[EMAIL PROTECTED](CHMOD) $(PERM_RWX) $(INST_MAN3DIR)
help:
perldoc ExtUtils::MakeMaker
# --- MakeMaker linkext section:
linkext :: $(LINKTYPE)
@$(NOOP)
# --- MakeMaker dlsyms section:
# --- MakeMaker dynamic section:
## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make dynamic"
#dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT) $(INST_PM)
dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT)
@$(NOOP)
# --- MakeMaker dynamic_bs section:
BOOTSTRAP = MD5.bs
# As Mkbootstrap might not write a file (if none is required)
# we use touch to prevent make continually trying to remake it.
# The DynaLoader only reads a non-empty file.
$(BOOTSTRAP): Makefile $(INST_ARCHAUTODIR)/.exists
@echo "Running Mkbootstrap for $(NAME) ($(BSLOADLIBS))"
@$(PERLRUN) \
"-MExtUtils::Mkbootstrap" \
-e "Mkbootstrap('$(BASEEXT)','$(BSLOADLIBS)');"
@$(TOUCH) $(BOOTSTRAP)
$(CHMOD) $(PERM_RW) $@
$(INST_BOOT): $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists
@rm -rf $(INST_BOOT)
-cp $(BOOTSTRAP) $(INST_BOOT)
$(CHMOD) $(PERM_RW) $@
# --- MakeMaker dynamic_lib section:
# This section creates the dynamically loadable $(INST_DYNAMIC)
# from $(OBJECT) and possibly $(MYEXTLIB).
ARMAYBE = :
OTHERLDFLAGS =
INST_DYNAMIC_DEP =
$(INST_DYNAMIC): $(OBJECT) $(MYEXTLIB) $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists
$(EXPORT_LIST) $(PERL_ARCHIVE) $(PERL_ARCHIVE_AFTER) $(INST_DYNAMIC_DEP)
$(RM_F) $@
LD_RUN_PATH="$(LD_RUN_PATH)" $(LD) $(LDDLFLAGS) $(LDFROM) $(OTHERLDFLAGS) -o
$@ $(MYEXTLIB) $(PERL_ARCHIVE) $(LDLOADLIBS) $(PERL_ARCHIVE_AFTER) $(EXPORT_LIST)
$(CHMOD) $(PERM_RWX) $@
# --- MakeMaker static section:
## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make static"
#static :: Makefile $(INST_STATIC) $(INST_PM)
static :: Makefile $(INST_STATIC)
@$(NOOP)
# --- MakeMaker static_lib section:
$(INST_STATIC): $(OBJECT) $(MYEXTLIB) $(INST_ARCHAUTODIR)/.exists
$(RM_RF) $@
$(FULL_AR) $(AR_STATIC_ARGS) $@ $(OBJECT) && $(RANLIB) $@
$(CHMOD) $(PERM_RWX) $@
@echo "$(EXTRALIBS)" > $(INST_ARCHAUTODIR)/extralibs.ld
# --- MakeMaker manifypods section:
POD2MAN_EXE = /usr/bin/pod2man
POD2MAN = $(PERL) -we '[EMAIL PROTECTED];for (keys %m){' \
-e 'next if -e $$m{$$_} && -M $$m{$$_} < -M $$_ && -M $$m{$$_} < -M "Makefile";' \
-e 'print "Manifying $$m{$$_}\n";' \
-e 'system(q[$(PERLRUN) $(POD2MAN_EXE) ].qq[$$_>$$m{$$_}])==0 or warn "Couldn\047t
install $$m{$$_}\n";' \
-e 'chmod(oct($(PERM_RW)), $$m{$$_}) or warn "chmod $(PERM_RW) $$m{$$_}: $$!\n";}'
manifypods : pure_all MD5.pm
@$(POD2MAN) \
MD5.pm \
$(INST_MAN3DIR)/Digest::MD5.$(MAN3EXT)
# --- MakeMaker processPL section:
# --- MakeMaker installbin section:
# --- MakeMaker subdirs section:
# none
# --- MakeMaker clean section:
# Delete temporary files but do not touch installed files. We don't delete
# the Makefile here so a later make realclean still has a makefile to use.
clean ::
-rm -rf MD5.c ./blib $(MAKE_APERL_FILE) $(INST_ARCHAUTODIR)/extralibs.all
perlmain.c tmon.out mon.out so_locations pm_to_blib *$(OBJ_EXT) *$(LIB_EXT) perl.exe
perl perl$(EXE_EXT) $(BOOTSTRAP) $(BASEEXT).bso $(BASEEXT).def lib$(BASEEXT).def
$(BASEEXT).exp $(BASEEXT).x core core.*perl.*.? *perl.core
-mv Makefile Makefile.old $(DEV_NULL)
# --- MakeMaker realclean section:
# Delete temporary files (via clean) and also delete installed files
realclean purge :: clean
rm -rf $(INST_AUTODIR) $(INST_ARCHAUTODIR)
rm -rf $(DISTVNAME)
rm -f $(INST_DYNAMIC) $(INST_BOOT)
rm -f $(INST_STATIC)
rm -f blib/lib/Digest/MD5.pm
rm -rf Makefile Makefile.old
# --- MakeMaker dist_basics section:
distclean :: realclean distcheck
$(NOECHO) $(NOOP)
distcheck :
$(PERLRUN) "-MExtUtils::Manifest=fullcheck" -e fullcheck
skipcheck :
$(PERLRUN) "-MExtUtils::Manifest=skipcheck" -e skipcheck
manifest :
$(PERLRUN) "-MExtUtils::Manifest=mkmanifest" -e mkmanifest
veryclean : realclean
$(RM_F) *~ *.orig */*~ */*.orig
# --- MakeMaker dist_core section:
dist : $(DIST_DEFAULT)
@$(PERL) -le 'print "Warning: Makefile possibly out of date with $$vf" if ' \
-e '-e ($$vf="$(VERSION_FROM)") and -M $$vf < -M "Makefile";'
tardist : $(DISTVNAME).tar$(SUFFIX)
zipdist : $(DISTVNAME).zip
$(DISTVNAME).tar$(SUFFIX) : distdir
$(PREOP)
$(TO_UNIX)
$(TAR) $(TARFLAGS) $(DISTVNAME).tar $(DISTVNAME)
$(RM_RF) $(DISTVNAME)
$(COMPRESS) $(DISTVNAME).tar
$(POSTOP)
$(DISTVNAME).zip : distdir
$(PREOP)
$(ZIP) $(ZIPFLAGS) $(DISTVNAME).zip $(DISTVNAME)
$(RM_RF) $(DISTVNAME)
$(POSTOP)
uutardist : $(DISTVNAME).tar$(SUFFIX)
uuencode $(DISTVNAME).tar$(SUFFIX) \
$(DISTVNAME).tar$(SUFFIX) > \
$(DISTVNAME).tar$(SUFFIX)_uu
shdist : distdir
$(PREOP)
$(SHAR) $(DISTVNAME) > $(DISTVNAME).shar
$(RM_RF) $(DISTVNAME)
$(POSTOP)
# --- MakeMaker dist_dir section:
distdir :
$(RM_RF) $(DISTVNAME)
$(PERLRUN) "-MExtUtils::Manifest=manicopy,maniread" \
-e "manicopy(maniread(),'$(DISTVNAME)', '$(DIST_CP)');"
# --- MakeMaker dist_test section:
disttest : distdir
cd $(DISTVNAME) && $(ABSPERLRUN) Makefile.PL
cd $(DISTVNAME) && $(MAKE) $(PASTHRU)
cd $(DISTVNAME) && $(MAKE) test $(PASTHRU)
# --- MakeMaker dist_ci section:
ci :
$(PERLRUN) "-MExtUtils::Manifest=maniread" \
-e "@all = keys %{ maniread() };" \
-e 'print("Executing $(CI) @all\n"); system("$(CI) @all");' \
-e 'print("Executing $(RCS_LABEL) ...\n"); system("$(RCS_LABEL)
@all");'
# --- MakeMaker install section:
install :: all pure_install doc_install
install_perl :: all pure_perl_install doc_perl_install
install_site :: all pure_site_install doc_site_install
install_vendor :: all pure_vendor_install doc_vendor_install
pure_install :: pure_$(INSTALLDIRS)_install
doc_install :: doc_$(INSTALLDIRS)_install
@echo Appending installation info to $(INSTALLARCHLIB)/perllocal.pod
pure__install : pure_site_install
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
doc__install : doc_site_install
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
pure_perl_install ::
@$(MOD_INSTALL) \
read $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist \
write $(INSTALLARCHLIB)/auto/$(FULLEXT)/.packlist \
$(INST_LIB) $(INSTALLPRIVLIB) \
$(INST_ARCHLIB) $(INSTALLARCHLIB) \
$(INST_BIN) $(INSTALLBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_MAN1DIR) $(INSTALLMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLMAN3DIR)
@$(WARN_IF_OLD_PACKLIST) \
$(SITEARCHEXP)/auto/$(FULLEXT)
pure_site_install ::
@$(MOD_INSTALL) \
read $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist \
write $(INSTALLSITEARCH)/auto/$(FULLEXT)/.packlist \
$(INST_LIB) $(INSTALLSITELIB) \
$(INST_ARCHLIB) $(INSTALLSITEARCH) \
$(INST_BIN) $(INSTALLSITEBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_MAN1DIR) $(INSTALLSITEMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLSITEMAN3DIR)
@$(WARN_IF_OLD_PACKLIST) \
$(PERL_ARCHLIB)/auto/$(FULLEXT)
pure_vendor_install ::
@$(MOD_INSTALL) \
$(INST_LIB) $(INSTALLVENDORLIB) \
$(INST_ARCHLIB) $(INSTALLVENDORARCH) \
$(INST_BIN) $(INSTALLVENDORBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_MAN1DIR) $(INSTALLVENDORMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLVENDORMAN3DIR)
doc_perl_install ::
[EMAIL PROTECTED](MKPATH) $(INSTALLARCHLIB)
[EMAIL PROTECTED](DOC_INSTALL) \
"Module" "$(NAME)" \
"installed into" "$(INSTALLPRIVLIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
>> $(INSTALLARCHLIB)/perllocal.pod
doc_site_install ::
[EMAIL PROTECTED](MKPATH) $(INSTALLARCHLIB)
[EMAIL PROTECTED](DOC_INSTALL) \
"Module" "$(NAME)" \
"installed into" "$(INSTALLSITELIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
>> $(INSTALLSITEARCH)/perllocal.pod
doc_vendor_install ::
uninstall :: uninstall_from_$(INSTALLDIRS)dirs
uninstall_from_perldirs ::
@$(UNINSTALL) $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist
uninstall_from_sitedirs ::
@$(UNINSTALL) $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist
# --- MakeMaker force section:
# Phony target to force checking subdirectories.
FORCE:
@$(NOOP)
# --- MakeMaker perldepend section:
PERL_HDRS = \
$(PERL_INC)/EXTERN.h \
$(PERL_INC)/INTERN.h \
$(PERL_INC)/XSUB.h \
$(PERL_INC)/av.h \
$(PERL_INC)/cc_runtime.h \
$(PERL_INC)/config.h \
$(PERL_INC)/cop.h \
$(PERL_INC)/cv.h \
$(PERL_INC)/dosish.h \
$(PERL_INC)/embed.h \
$(PERL_INC)/embedvar.h \
$(PERL_INC)/fakethr.h \
$(PERL_INC)/form.h \
$(PERL_INC)/gv.h \
$(PERL_INC)/handy.h \
$(PERL_INC)/hv.h \
$(PERL_INC)/intrpvar.h \
$(PERL_INC)/iperlsys.h \
$(PERL_INC)/keywords.h \
$(PERL_INC)/mg.h \
$(PERL_INC)/nostdio.h \
$(PERL_INC)/op.h \
$(PERL_INC)/opcode.h \
$(PERL_INC)/opnames.h \
$(PERL_INC)/patchlevel.h \
$(PERL_INC)/perl.h \
$(PERL_INC)/perlapi.h \
$(PERL_INC)/perlio.h \
$(PERL_INC)/perlsdio.h \
$(PERL_INC)/perlsfio.h \
$(PERL_INC)/perlvars.h \
$(PERL_INC)/perly.h \
$(PERL_INC)/pp.h \
$(PERL_INC)/pp_proto.h \
$(PERL_INC)/proto.h \
$(PERL_INC)/regcomp.h \
$(PERL_INC)/regexp.h \
$(PERL_INC)/regnodes.h \
$(PERL_INC)/scope.h \
$(PERL_INC)/sv.h \
$(PERL_INC)/thrdvar.h \
$(PERL_INC)/thread.h \
$(PERL_INC)/unixish.h \
$(PERL_INC)/utf8.h \
$(PERL_INC)/util.h \
$(PERL_INC)/warnings.h
$(OBJECT) : $(PERL_HDRS)
MD5.c : $(XSUBPPDEPS)
# --- MakeMaker makefile section:
$(OBJECT) : $(FIRST_MAKEFILE)
# We take a very conservative approach here, but it\'s worth it.
# We move Makefile to Makefile.old here to avoid gnu make looping.
Makefile : Makefile.PL $(CONFIGDEP)
@echo "Makefile out-of-date with respect to $?"
@echo "Cleaning current config before rebuilding Makefile..."
[EMAIL PROTECTED](RM_F) Makefile.old
[EMAIL PROTECTED](MV) Makefile Makefile.old
-$(MAKE) -f Makefile.old clean $(DEV_NULL) || $(NOOP)
$(PERLRUN) Makefile.PL "-v"
@echo "==> Your Makefile has been rebuilt. <=="
@echo "==> Please rerun the make command. <=="
false
# --- MakeMaker staticmake section:
# --- MakeMaker makeaperl section ---
MAP_TARGET = perl
FULLPERL = /usr/bin/perl
$(MAP_TARGET) :: static $(MAKE_APERL_FILE)
$(MAKE) -f $(MAKE_APERL_FILE) $@
$(MAKE_APERL_FILE) : $(FIRST_MAKEFILE)
@echo Writing \"$(MAKE_APERL_FILE)\" for this $(MAP_TARGET)
@$(PERLRUNINST) \
Makefile.PL DIR= \
MAKEFILE=$(MAKE_APERL_FILE) LINKTYPE=static \
MAKEAPERL=1 NORECURS=1 CCCDLFLAGS= \
-v
# --- MakeMaker test section:
TEST_VERBOSE=0
TEST_TYPE=test_$(LINKTYPE)
TEST_FILE = test.pl
TEST_FILES = t/*.t
TESTDB_SW = -d
testdb :: testdb_$(LINKTYPE)
test :: $(TEST_TYPE)
test_dynamic :: pure_all
PERL_DL_NONLAZY=1 $(FULLPERLRUN) "-MExtUtils::Command::MM" "-e"
"test_harness($(TEST_VERBOSE), '$(INST_LIB)', '$(INST_ARCHLIB)')" $(TEST_FILES)
testdb_dynamic :: pure_all
PERL_DL_NONLAZY=1 $(FULLPERLRUN) $(TESTDB_SW) "-I$(INST_LIB)"
"-I$(INST_ARCHLIB)" $(TEST_FILE)
test_ : test_dynamic
test_static :: pure_all $(MAP_TARGET)
PERL_DL_NONLAZY=1 ./$(MAP_TARGET) "-MExtUtils::Command::MM" "-e"
"test_harness($(TEST_VERBOSE), '$(INST_LIB)', '$(INST_ARCHLIB)')" $(TEST_FILES)
testdb_static :: pure_all $(MAP_TARGET)
PERL_DL_NONLAZY=1 ./$(MAP_TARGET) $(TESTDB_SW) "-I$(INST_LIB)"
"-I$(INST_ARCHLIB)" $(TEST_FILE)
# --- MakeMaker ppd section:
# Creates a PPD (Perl Package Description) for a binary distribution.
ppd:
@$(PERL) -e "print qq{<SOFTPKG NAME=\"$(DISTNAME)\"
VERSION=\"2,33,0,0\">\n\t<TITLE>$(DISTNAME)</TITLE>\n\t<ABSTRACT></ABSTRACT>\n\t<AUTHOR></AUTHOR>\n}"
> $(DISTNAME).ppd
@$(PERL) -e "print qq{\t<IMPLEMENTATION>\n\t\t<DEPENDENCY NAME=\"Digest-base\"
VERSION=\"1,00,0,0\" />\n\t\t<DEPENDENCY NAME=\"File-Spec\" VERSION=\"0,0,0,0\" />\n}"
>> $(DISTNAME).ppd
@$(PERL) -e "print qq{\t\t<OS NAME=\"$(OSNAME)\" />\n\t\t<ARCHITECTURE
NAME=\"i386-linux\" />\n\t\t<CODEBASE HREF=\"\"
/>\n\t</IMPLEMENTATION>\n</SOFTPKG>\n}" >> $(DISTNAME).ppd
# --- MakeMaker pm_to_blib section:
pm_to_blib: $(TO_INST_PM)
@$(PERLRUNINST) "-MExtUtils::Install" \
-e "pm_to_blib({qw{MD5.pm
blib/lib/Digest/MD5.pm}},'$(INST_LIB)/auto','$(PM_FILTER)')"
@$(TOUCH) $@
# --- MakeMaker selfdocument section:
# --- MakeMaker postamble section:
# End.
