Hi Josh! A common misconception, perhaps due to an unclear GUI of graduated symbols (bubble map?).
The 'three grades' are only samples, and intermediate bubble sizes will be created as needed. You only get to select the symbol size for one value and have to play around with that to match your data set. Suggestion: Try 'advanced' and log(arithmic) if your range is very wide. H�lsning / Best regards Mats.E ________________________ FB Engineering AB S�dra F�rstadsgatan 26 211 43 Malm� Tel: 040-660 25 50 Mobil: 0705-27 60 27 Fax: 040-660 25 99 [EMAIL PROTECTED] www.fbe.se "Hickman, Josh" <[EMAIL PROTECTED]> 2004-12-10 17:07 Till <[EMAIL PROTECTED]> Kopia �rende MI-L Thematic Bubble Map Question A good Friday to everyone! My conundrum is as follows: I wish to use a bubble map to display a relationship in MapInfo 7.0. The problem is that there only seems to be 3 grades of bubbles I can use. (If you have negative values you can also use bubbles of another color to represent this). However for the finer detail that I am trying to get across three grades is not sufficient. Is there a way to pick the number of bubble sizes that I am missing? Thanks for any advice on this. I'm stumped. Josh C. Hickman, M.Sc. Exploration Geoscientist CNX Gas, LLC PO Box 947 Bluefield VA 24605 http://www.consolenergy.com Work: 276-988-1036 Fax: 276-988-1076 --------------------------------------------------------------------- List hosting provided by Directions Magazine | www.directionsmag.com | To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Message number: 14495
