I have a large table of lines, which represent drainage. Each link contains
data about the upstream and downstream levels. About half of the links are
drawn such that they start at the downstream end; if the line direction
arrows are displayed then these point uphill. There is a field in the table
to indicate which links have a correct, and which an incorrect, line
direction.
What I'd like to do is reverse the direction of these lines. The
REVERDIR.MBX tool which I have only enables one link to be reversed at a
time.
Is there an alternative tool/method for reversing numerous lines in batch
mode?
Yours hopefully
Martin Spiers
Senior Engineer
MWH
Kenburgh House,
Manor Row,
Bradford
BD1 4QU
Tel: 01274 718786
Fax: 01274 718799
email: [EMAIL PROTECTED]
=====================================================================
This electronic communication and its attachments may contain confidential,
proprietary and/or legally privileged information and are for the sole use
of the intended recipient. If you are not the intended recipient, any use,
distribution, or reproduction of this communication is strictly prohibited
and may be unlawful; please contact the sender and delete this
communication.
MWH does not warrant or make any representation regarding this transmission
whatsoever nor does it warrant that it is free from viruses or defects,
correct or reliable. MWH is not liable for any loss or damage that occurs
as a result of this communication entering your computer network.
The views expressed in this message are not necessarily those of MWH.
This communication cannot form a binding agreement unless that is the
express
intent of the parties and they are authorized to make such an agreement.
MWH reserves all intellectual property rights contained in this
transmission.
MWH reserves the right to monitor any electronic communication sent or
received by its employees.
---------------------------------------------------------------------
List hosting provided by Directions Magazine | www.directionsmag.com |
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Message number: 17641
