Hi Peter, It sounds like you have a State Plane coordinate system in your hands. Check to see which ones are available for the area you are working with. I'll bet MapInfo has one already defined for you. Good luck!
Milton CONFIDENTIALITY NOTICE: This communication is intended only for the use of the individual or entity to which it is addressed. This message contains information from the State of California, California Geological Survey, which may be privileged, confidential and exempt from disclosure under applicable law, including the Electronic Communications Privacy Act. If the reader of this communication is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Peter Lauridsen Sent: Wednesday, June 07, 2006 8:06 AM To: MapInfo-L@lists.directionsmag.com Subject: [MI-L] Lambert Conformal Conic projection NAD83,meters Hi folks, I have some mr. SID orthoimagery of Lake Ontario. I'm using MI 8.0 and cannot find the correect projection to display the images. Their metadata has them referenced to Lambert Conformal Conic Projection ,Nad 83, meters. MI has lots of projections to chose. None match exactly and some of the very close ones are a no go. Can anyone provide guidance. Perhaps the correct parameters for the tab file. Thanks Peter Lauridsen Coastal Resources Specialist New York State Department of State Division of Coastal Resources 41 State Street Albany, New York 12231-0001 (518) 473-7692 (518) 473-2464 fax _______________________________________________ MapInfo-L mailing list MapInfo-L@lists.directionsmag.com http://www.directionsmag.com/mailman/listinfo/mapinfo-l _______________________________________________ MapInfo-L mailing list MapInfo-L@lists.directionsmag.com http://www.directionsmag.com/mailman/listinfo/mapinfo-l