Hi, this should be useable.
Just create a tileindex using gdaltindex. The sequence in the dbf file of the tileindex will determine the sequence in which Mapserver will draw the rasters. See the raster HOWTO: http://mapserver.gis.umn.edu/docs/howto/raster_data Best regards, Bart -----Oorspronkelijk bericht----- Van: UMN MapServer Users List [mailto:[EMAIL PROTECTED] wbr Verzonden: maandag 6 maart 2006 13:05 Aan: [email protected] Onderwerp: [UMN_MAPSERVER-USERS] TIFF Raster Images - UTM32,33 Hi All, I'm using the mapserver for several solutions, and now i got raster images for Germany (1:50000 UTM32 and UTM33). I have only little experience in using large raster maps in mapserver. My Question: i got the files as tiff with corresponding tfw files and on the bounding of utm 32+33 the tiff files overlap. Is this usable in mapserver (tileindex etc.) ? Please can somebody point me out ? Thank you, Wolfgang Brungert -- T-Mobile Deutschland GmbH Program and Budget Management (TRPD13-D) Roddestr. 12 48153 Münster Phone: +49 251 977 4142 Fax: +49 251 977 4149 email: [EMAIL PROTECTED] PGP Fingerprint: B3F8 D368 5EEF 3873 3C4F 423C 171E F217 7CA4 3467 Disclaimer ************************************************************************ Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te informeren. Wij adviseren u om bij twijfel over de juistheid of de volledigheid van de mail contact met afzender op te nemen. This message shall not constitute any rights or obligations. This message is intended solely for the addressee. If you have received this message in error, please delete it and notify the sender immediately. When in doubt whether this message is correct or complete, please contact the sender. ************************************************************************
