The sunfreeware gcc package is compiled with --with-ld=/usr/ccs/bin/ld
so it can be hard to get around it. (you can see this by running g++ -v)
The sun ld version did not want to compile agg for me. I ended up
renaming /usr/ccs/bin/ld to /usr/ccs/bin/ld-off I then put it back
after the compile. This of course requires root access.
It is not very elegant but it worked. If anyone has any other
suggestions I'd love to know how to force the proper ld with resorting
to this. It just plain ignored the makefile and environment settings.
-Trent
Nolte, Tim wrote:
OK, well here's my setup. I have the following sunfreeware packages
installed:
gcc-3.4.6-sol10-x86-local
make-3.81-sol10-x86-local
automake-1.10-sol10-x86-local
libtool-1.5.24-sol10-x86-local
I've set my PATH environment to use '/usr/local/bin' before
'/usr/ccs/bin'. And my g++/gcc/make/ar/ld are all GNU when I run 'type'
on them. I did notice that gcc reports (Configured with: ../configure
--with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld --enable-shared
--enable-languages=c,c++,f77) so I'm not sure if this would be an issue.
Thanks for any other thoughts.
----
Timothy J Nolte - [EMAIL PROTECTED]
Associate Network Planning Engineer
iPCS Wireless, Inc.
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS: 616-706-2438
Fax: 616-554-6484
Web: www.ipcswirelessinc.com
-----Original Message-----
From: Johan Van de Wauw [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 16, 2007 9:58 AM
To: Nolte, Tim
Cc: [email protected]
Subject: Re: [UMN_MAPSERVER-USERS] Solaris AGG Compile...
It's been a while since I've worked with solaris, but you should try
this
make install CXX=g++ C=gcc AR=gar LD=gld
(no need to edit the makefile)
gar = gnu ar -> now you are using the one from suns's compiler. Idem
for C and C++: make sure you don't mix up the gnu and the sun tools.
idem for ld and the other tools.
On 10/16/07, Nolte, Tim <[EMAIL PROTECTED]> wrote:
OK, so a standard 'make' would work, erroring on CC not being defined.
I
made the following changes to Makefile.in.SunOS:
Changed:
CXX = CC
To:
CXX = gcc
Changed:
C = cc
To:
C = gcc
Changed:
LIB = CC -xar -o
To:
LIB = gcc -xar -o
Then I was able to begin running a 'make' but it dies with the
following:
gcc: language ar not recognized
...
gcc: language ar not recognized
Undefined first referenced
symbol in file
cos agg_arc.o
sin agg_arc.o
acos agg_arc.o
ceil agg_image_filters.o
fmod agg_bezier_arc.o
main
/usr/local/lib/gcc/i386-pc-solaris2.10/3.4.6/crt1.o
sqrt agg_bezier_arc.o
operator new[](unsigned int) agg_bspline.o
atan2 agg_curves.o
floor ctrl/agg_polygon_ctrl.o
vtable for
__cxxabiv1::__si_class_type_infoctrl/agg_cbox_ctrl.o
operator delete[](void*) agg_bspline.o
operator delete(void*) ctrl/agg_cbox_ctrl.o
vtable for __cxxabiv1::__class_type_infoctrl/agg_cbox_ctrl.o
__gxx_personality_v0 agg_arc.o
__cxa_pure_virtual ctrl/agg_cbox_ctrl.o
ld: fatal: Symbol referencing errors. No output written to
libagg.a
collect2: ld returned 1 exit status
make[1]: *** [all] Error 1
make[1]: Leaving directory `/usr/local/agg-2.4/src'
make: *** [src/libagg.a] Error 2
Thanks.
----
Timothy J Nolte - [EMAIL PROTECTED]
Associate Network Planning Engineer
iPCS Wireless, Inc.
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS: 616-706-2438
Fax: 616-554-6484
Web: www.ipcswirelessinc.com
-----Original Message-----
From: Trent Erickson [mailto:[EMAIL PROTECTED]
Sent: Monday, October 15, 2007 3:32 PM
To: Nolte, Tim
Cc: [email protected]
Subject: Re: [UMN_MAPSERVER-USERS] Solaris AGG Compile...
More technical details would be helpful. I can offer my experience
although it may not be applicable. I have compiled on Solaris 9 using
the GNU make and ld. Be sure you are using GNU ld. The Sun version
didn't work for me.
-Trent
Nolte, Tim wrote:
I'm at the end of my rope here. I'm running up against a deadline
and
I
can't get AGG compiled on Solaris 10 x86 for the life of me. I'm
afraid
I'm going to end up having to go back to GD. I made the mistake of
using
HostGIS to setup and interim mapserver while I rebuild the existing
one
and decided to go with Solaris as the rest of our servers are
running
on
it. Anyways, if anyone has successfully compiled AGG on a Solaris
box
it
would help me out huge! Thanks.
- Tim
----
Timothy J Nolte - [EMAIL PROTECTED]
Associate Network Planning Engineer
iPCS Wireless, Inc.
4717 Broadmoor Ave, Suite G
Kentwood, MI 49512
Office: 616-656-5163
PCS: 616-706-2438
Fax: 616-554-6484
Web: www.ipcswirelessinc.com
