On my system, commands to examine the file are nm, objdump and ldd. They
have man pages and the ld.so man page describes environment variables which
can be set to do tracing. The environment variable can be tricky to use --
a bad choice can make your current terminal session unusable.
First think I'd be curious to know is are all those "not found" symbols
actually defined in R2.so, and if so, how?
On Wed, Dec 26, 2018 at 4:07 PM <krishna.s...@gmail.com> wrote:
> Hi Jeff,
>
> File exists, how to verify the link loader ?
>
> # ls -ltr
> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so
> -rwx------ 1 root system 1176733 Dec 26 12:07
> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so
> root@czapms22 /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000 >
>
>
>
>
> On Thursday, December 27, 2018 at 2:19:23 AM UTC+5:30, Jeffrey Kegler
> wrote:
>>
>> My first guess would be that the crucial messages are the ones in this
>> series:
>>
>> # Can't load
>>> '/tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so'
>>> for module Marpa::R2: rtld: 0712-001 Symbol _marpa_v_trace was referenced
>>> # from module
>>> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so(),
>>> but a runtime definition
>>> # of the symbol was not found.
>>
>>
>> Things I would look at first are paths, and the R2.so file itself -- does
>> it actually exist, does it look like it was built right, does it contain an
>> _marpa_v_trace symbol, what happens when you trace the link loader, etc.?
>>
>> As a random guess, perhaps AIX has special rules about symbol visibility,
>> which explain why it is not finding the symbols in R2.so.
>>
>> Anyone else with suggestions?
>>
>> Hope this helps, jeffrey
>>
>> On Wed, Dec 26, 2018 at 3:12 PM <krishn...@gmail.com> wrote:
>>
>>> Hi Jeff
>>>
>>> Perl and the compilers I am using, I can able install all dependency
>>> modules, Only getting issue with Marpa::R2 module.
>>>
>>>
>>> /usr/opt/perl5/bin/perl -V --- XLC
>>> - xlc_r -q32
>>> /usr/opt/perl5_5203/bin/perl -V --- GCC - gcc -maix64 -maix64
>>> /usr/bin/perl -V --- XLC - cc='xlc_r -q32'
>>>
>>> I tried with the recent updated module from Meta::Cpan
>>>
>>> below find the details
>>>
>>> root@czapms22 /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000 >
>>> # ls -ltr
>>> total 192
>>> drwxr-xr-x 2 1000 1000 256 Dec 16 14:24 xs
>>> -r--r--r-- 1 1000 1000 4045 Dec 16 14:24 typemap
>>> drwxr-xr-x 2 1000 1000 4096 Dec 16 14:24 t
>>> drwxr-xr-x 3 1000 1000 256 Dec 16 14:24 pperl
>>> drwxr-xr-x 6 1000 1000 4096 Dec 16 14:24 pod
>>> drwxr-xr-x 2 1000 1000 256 Dec 16 14:24 meta
>>> drwxr-xr-x 3 1000 1000 256 Dec 16 14:24 lib
>>> drwxr-xr-x 4 1000 1000 256 Dec 16 14:24 inc
>>> drwxr-xr-x 8 1000 1000 256 Dec 16 14:24 html
>>> drwxr-xr-x 3 1000 1000 256 Dec 16 14:24 g
>>> drwxr-xr-x 2 1000 1000 4096 Dec 16 14:24 etc
>>> drwxr-xr-x 3 1000 1000 256 Dec 16 14:24 engine
>>> drwxr-xr-x 2 1000 1000 4096 Dec 16 14:24 author.t
>>> -r--r--r-- 1 1000 1000 143 Dec 16 14:24 README
>>> -r--r--r-- 1 1000 1000 3799 Dec 16 14:24 META.yml
>>> -r--r--r-- 1 1000 1000 5771 Dec 16 14:24 META.json
>>> -r--r--r-- 1 1000 1000 2259 Dec 16 14:24 MANIFEST.SKIP
>>> -r--r--r-- 1 1000 1000 6889 Dec 16 14:24 MANIFEST
>>> -r--r--r-- 1 1000 1000 809 Dec 16 14:24 LICENSE
>>> -r--r--r-- 1 1000 1000 670 Dec 16 14:24 INSTALL
>>> -r--r--r-- 1 1000 1000 10407 Dec 16 14:24 Changes
>>> -r--r--r-- 1 1000 1000 7653 Dec 16 14:24 COPYING.LESSER
>>> -r--r--r-- 1 1000 1000 5976 Dec 16 14:24 Build.PL
>>> -r--r--r-- 1 1000 1000 402 Dec 16 14:24 .gitignore
>>> -r--r--r-- 1 1000 1000 31 Dec 16 14:24 .gitattributes
>>> -r--r--r-- 1 1000 1000 95 Dec 16 14:24 .gdbinit
>>> root@czapms22 /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000 >
>>> #
>>> root@czapms22 /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000 >
>>> # cd pod
>>> root@czapms22 /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/pod >
>>> # ls -ltr
>>> total 672
>>> -r--r--r-- 1 1000 1000 15552 Dec 16 14:24 Vocabulary.pod
>>> -r--r--r-- 1 1000 1000 8382 Dec 16 14:24 Tutorial2.pod
>>> -r--r--r-- 1 1000 1000 5263 Dec 16 14:24 Tracing.pod
>>> -r--r--r-- 1 1000 1000 2490 Dec 16 14:24 Support.pod
>>> -r--r--r-- 1 1000 1000 33537 Dec 16 14:24 Semantics.pod
>>> drwxr-xr-x 2 1000 1000 256 Dec 16 14:24 Semantics
>>> -r--r--r-- 1 1000 1000 14949 Dec 16 14:24 Scanless.pod
>>> drwxr-xr-x 2 1000 1000 256 Dec 16 14:24 Scanless
>>> -r--r--r-- 1 1000 1000 52475 Dec 16 14:24 Progress.pod
>>> -r--r--r-- 1 1000 1000 19387 Dec 16 14:24 NAIF.pod
>>> drwxr-xr-x 3 1000 1000 256 Dec 16 14:24 NAIF
>>> -r-xr-xr-x 1 1000 1000 23052 Dec 16 14:24 Marpa_R2.pod
>>> -r--r--r-- 1 1000 1000 39347 Dec 16 14:24 Glade.pod
>>> -r--r--r-- 1 1000 1000 11450 Dec 16 14:24 Exhaustion.pod
>>> -r--r--r-- 1 1000 1000 40655 Dec 16 14:24 Event.pod
>>> -r--r--r-- 1 1000 1000 12335 Dec 16 14:24 Changes.pod
>>> -r--r--r-- 1 1000 1000 6023 Dec 16 14:24 BNF.pod
>>> drwxr-xr-x 2 1000 1000 256 Dec 16 14:24 Advanced
>>> -r--r--r-- 1 1000 1000 4695 Dec 16 14:24
>>> Acknowledgements.pod
>>> -r--r--r-- 1 1000 1000 22172 Dec 16 14:24 ASF.pod
>>> root@czapms22 /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/pod >
>>> # cd ..
>>> root@czapms22 /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000 >
>>> # ls
>>> .gdbinit COPYING.LESSER MANIFEST README g
>>> meta typemap
>>> .gitattributes Changes MANIFEST.SKIP author.t html
>>> pod xs
>>> .gitignore INSTALL META.json engine inc
>>> pperl
>>> Build.PL LICENSE META.yml etc lib
>>> t
>>> root@czapms22 /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000 >
>>> # /usr/opt/perl5_5203/bin/perl Build.PL
>>> Module::Build will be removed from the Perl core distribution in the
>>> next major release. Please install it from CPAN. It is being used at
>>> Build.PL, line 26.
>>> Created MYMETA.yml and MYMETA.json
>>> Creating new 'Build' script for 'Marpa-R2' version '8.000000'
>>> root@czapms22 /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000 >
>>> # /usr/opt/perl5_5203/bin/perl Build
>>> Module::Build will be removed from the Perl core distribution in the
>>> next major release. Please install it from CPAN. It is being used at
>>> inc/Marpa/R2/Build_Me.pm, line 29.
>>> Building Marpa-R2
>>> Writing version files
>>> Running [/bin/sh configure --with-pic --disable-shared
>>> --disable-maintainer-mode]...
>>> checking whether to enable maintainer-specific portions of Makefiles...
>>> no
>>> checking for a BSD-compatible install... ./install-sh -c
>>> checking whether build environment is sane... yes
>>> checking for a thread-safe mkdir -p... ./install-sh -c -d
>>> checking for gawk... no
>>> checking for mawk... no
>>> checking for nawk... nawk
>>> checking whether make sets $(MAKE)... yes
>>> checking whether make supports nested variables... yes
>>> checking build system type... powerpc-ibm-aix7.2.1.0
>>> checking host system type... powerpc-ibm-aix7.2.1.0
>>> checking how to print strings... print -r
>>> checking for style of include used by make... GNU
>>> checking for gcc... gcc
>>> checking whether the C compiler works... yes
>>> checking for C compiler default output file name... a.out
>>> checking for suffix of executables...
>>> checking whether we are cross compiling... no
>>> checking for suffix of object files... o
>>> checking whether we are using the GNU C compiler... yes
>>> checking whether gcc accepts -g... yes
>>> checking for gcc option to accept ISO C89... none needed
>>> checking whether gcc understands -c and -o together... yes
>>> checking dependency style of gcc... gcc3
>>> checking for a sed that does not truncate output... /usr/bin/sed
>>> checking for grep that handles long lines and -e... /usr/bin/grep
>>> checking for egrep... /usr/bin/grep -E
>>> checking for fgrep... /usr/bin/grep -F
>>> checking for ld used by gcc... /usr/bin/ld
>>> checking if the linker (/usr/bin/ld) is GNU ld... no
>>> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
>>> checking the name lister (/usr/bin/nm -B) interface... BSD nm
>>> checking whether ln -s works... yes
>>> checking the maximum length of command line arguments... 786432
>>> checking how to convert powerpc-ibm-aix7.2.1.0 file names to
>>> powerpc-ibm-aix7.2.1.0 format... func_convert_file_noop
>>> checking how to convert powerpc-ibm-aix7.2.1.0 file names to toolchain
>>> format... func_convert_file_noop
>>> checking for /usr/bin/ld option to reload object files... -r
>>> checking for objdump... no
>>> checking how to recognize dependent libraries... pass_all
>>> checking for dlltool... no
>>> checking how to associate runtime and link libraries... print -r --
>>> checking for ar... ar
>>> checking for archiver @FILE support... no
>>> checking for strip... strip
>>> checking for ranlib... ranlib
>>> checking command to parse /usr/bin/nm -B output from gcc object... ok
>>> checking for sysroot... no
>>> checking for a working dd... /usr/bin/dd
>>> checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
>>> checking for mt... mt
>>> checking if mt is a manifest tool... no
>>> checking how to run the C preprocessor... gcc -E
>>> checking for ANSI C header files... yes
>>> checking for sys/types.h... yes
>>> checking for sys/stat.h... yes
>>> checking for stdlib.h... yes
>>> checking for string.h... yes
>>> checking for memory.h... yes
>>> checking for strings.h... yes
>>> checking for inttypes.h... yes
>>> checking for stdint.h... yes
>>> checking for unistd.h... yes
>>> checking for dlfcn.h... yes
>>> checking for objdir... .libs
>>> checking if gcc supports -fno-rtti -fno-exceptions... no
>>> checking for gcc option to produce PIC... -fPIC -DPIC
>>> checking if gcc PIC flag -fPIC -DPIC works... yes
>>> checking if gcc static flag -static works... no
>>> checking if gcc supports -c -o file.o... yes
>>> checking if gcc supports -c -o file.o... (cached) yes
>>> checking whether the gcc linker (/usr/bin/ld) supports shared
>>> libraries... yes
>>> checking dynamic linker characteristics... AIX lib.a(lib.so.V)
>>> checking how to hardcode library paths into programs... immediate
>>> checking whether stripping libraries is possible... no
>>> checking if libtool supports shared libraries... yes
>>> checking whether to build shared libraries... no
>>> checking whether to build static libraries... yes
>>> checking for gawk... (cached) nawk
>>> checking for gcc... (cached) gcc
>>> checking whether we are using the GNU C compiler... (cached) yes
>>> checking whether gcc accepts -g... (cached) yes
>>> checking for gcc option to accept ISO C89... (cached) none needed
>>> checking whether gcc understands -c and -o together... (cached) yes
>>> checking dependency style of gcc... (cached) gcc3
>>> checking how to run the C preprocessor... gcc -E
>>> checking whether ln -s works... yes
>>> checking whether make sets $(MAKE)... (cached) yes
>>> checking stddef.h usability... yes
>>> checking stddef.h presence... yes
>>> checking for stddef.h... yes
>>> checking for stdlib.h... (cached) yes
>>> checking for inline... inline
>>> checking for size_t... yes
>>> checking whether GCC handles -Wextra... -Wextra
>>> checking whether GCC handles -Wdeclaration-after-statement...
>>> -Wdeclaration-after-statement
>>> checking size of int... 4
>>> checking for memset... yes
>>> checking that generated files are newer than configure... done
>>> configure: creating ./config.status
>>> config.status: creating Makefile
>>> config.status: creating LIB_VERSION
>>> config.status: creating config.h
>>> config.status: executing depfiles commands
>>> config.status: executing libtool commands
>>> Running [make]...
>>> make all-am
>>> /bin/sh ./libtool --tag=CC --mode=compile gcc
>>> -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall -Wextra
>>> -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa.lo -MD -MP -MF .deps/marpa.Tpo -c -o marpa.lo
>>> marpa.c
>>> libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall
>>> -Wextra -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa.lo -MD -MP -MF .deps/marpa.Tpo -c marpa.c -fPIC
>>> -DPIC -o marpa.o
>>> mv -f .deps/marpa.Tpo .deps/marpa.Plo
>>> /bin/sh ./libtool --tag=CC --mode=compile gcc
>>> -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall -Wextra
>>> -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa_obs.lo -MD -MP -MF .deps/marpa_obs.Tpo -c -o
>>> marpa_obs.lo marpa_obs.c
>>> libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall
>>> -Wextra -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa_obs.lo -MD -MP -MF .deps/marpa_obs.Tpo -c
>>> marpa_obs.c -fPIC -DPIC -o marpa_obs.o
>>> mv -f .deps/marpa_obs.Tpo .deps/marpa_obs.Plo
>>> /bin/sh ./libtool --tag=CC --mode=compile gcc
>>> -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall -Wextra
>>> -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa_avl.lo -MD -MP -MF .deps/marpa_avl.Tpo -c -o
>>> marpa_avl.lo marpa_avl.c
>>> libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall
>>> -Wextra -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa_avl.lo -MD -MP -MF .deps/marpa_avl.Tpo -c
>>> marpa_avl.c -fPIC -DPIC -o marpa_avl.o
>>> mv -f .deps/marpa_avl.Tpo .deps/marpa_avl.Plo
>>> /bin/sh ./libtool --tag=CC --mode=compile gcc
>>> -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall -Wextra
>>> -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa_tavl.lo -MD -MP -MF .deps/marpa_tavl.Tpo -c -o
>>> marpa_tavl.lo marpa_tavl.c
>>> libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall
>>> -Wextra -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa_tavl.lo -MD -MP -MF .deps/marpa_tavl.Tpo -c
>>> marpa_tavl.c -fPIC -DPIC -o marpa_tavl.o
>>> mv -f .deps/marpa_tavl.Tpo .deps/marpa_tavl.Plo
>>> /bin/sh ./libtool --tag=CC --mode=compile gcc
>>> -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall -Wextra
>>> -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa_ami.lo -MD -MP -MF .deps/marpa_ami.Tpo -c -o
>>> marpa_ami.lo marpa_ami.c
>>> libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall
>>> -Wextra -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa_ami.lo -MD -MP -MF .deps/marpa_ami.Tpo -c
>>> marpa_ami.c -fPIC -DPIC -o marpa_ami.o
>>> ./marpa_ami.w: In function 'marpa__default_debug_handler':
>>> ./marpa_ami.w:372:1: warning: conversion to 'short int' from 'int' may
>>> alter its value [-Wconversion]
>>> mv -f .deps/marpa_ami.Tpo .deps/marpa_ami.Plo
>>> /bin/sh ./libtool --tag=CC --mode=compile gcc
>>> -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall -Wextra
>>> -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa_codes.lo -MD -MP -MF .deps/marpa_codes.Tpo -c
>>> -o marpa_codes.lo marpa_codes.c
>>> libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wundef -Wendif-labels -Wall
>>> -Wextra -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -MT marpa_codes.lo -MD -MP -MF .deps/marpa_codes.Tpo -c
>>> marpa_codes.c -fPIC -DPIC -o marpa_codes.o
>>> mv -f .deps/marpa_codes.Tpo .deps/marpa_codes.Plo
>>> /bin/sh ./libtool --tag=CC --mode=link gcc -Wall -Wextra
>>> -Wdeclaration-after-statement -Wpointer-arith -Wstrict-prototypes
>>> -Wwrite-strings -Wshadow -Wmissing-declarations -Wconversion -ansi
>>> -pedantic -g -O2 -release 8.6.2 -o libmarpa.la -rpath /usr/local/lib
>>> marpa.lo marpa_obs.lo marpa_avl.lo marpa_tavl.lo marpa_ami.lo
>>> marpa_codes.lo
>>> libtool: link: ar cru .libs/libmarpa.a marpa.o marpa_obs.o marpa_avl.o
>>> marpa_tavl.o marpa_ami.o marpa_codes.o
>>> libtool: link: ranlib .libs/libmarpa.a
>>> libtool: link: ( cd ".libs" && rm -f "libmarpa.la" && ln -s "../
>>> libmarpa.la" "libmarpa.la" )
>>> Target "all-am" is up to date.
>>> gcc -maix64 -maix64 -I/usr/opt/perl5_5203/lib/5.20.3/aix-64all/CORE
>>> -DVERSION="8.000000" -DXS_VERSION="8.000000" -c -D_ALL_SOURCE
>>> -D_ANSI_C_SOURCE -D_POSIX_SOURCE -DUSE_NATIVE_DLOPEN -fno-strict-aliasing
>>> -pipe -maix64 -DUSE_64_BIT_ALL -I
>>> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/libmarpa_build -I xs -Wall -W
>>> -Wpointer-arith -Wstrict-prototypes -Wwrite-strings -Wmissing-declarations
>>> -ansi -Wdeclaration-after-statement -g -o lib/Marpa/R2.o lib/Marpa/R2.c
>>> Using built-in Libmarpa
>>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/Marpa/R2/R2.bs')
>>> gcc -maix64 -maix64 -Wl,-b64 -Wl,-bhalt:4 -Wl,-G
>>> -Wl,-bI:/usr/opt/perl5_5203/lib/5.20.3/aix-64all/CORE/perl.exp
>>> -Wl,-bE:R2.exp -Wl,-bnoentry -lc -lm -o blib/arch/auto/Marpa/R2/R2.so
>>> lib/Marpa/R2.o
>>> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/libmarpa_build/.libs/libmarpa.a
>>> root@czapms22 /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000 >
>>> # /usr/opt/perl5_5203/bin/perl Build test
>>> Module::Build will be removed from the Perl core distribution in the
>>> next major release. Please install it from CPAN. It is being used at
>>> inc/Marpa/R2/Build_Me.pm, line 29.
>>> Using built-in Libmarpa
>>> t/00-load.t ............ Bailout called. Further testing stopped:
>>> Could not load Marpa::R2
>>> # Can't load
>>> '/tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so'
>>> for module Marpa::R2: rtld: 0712-001 Symbol _marpa_v_trace was referenced
>>> # from module
>>> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so(),
>>> but a runtime definition
>>> # of the symbol was not found.
>>> # rtld: 0712-001 Symbol _marpa_t_nook_predecessor_is_ready was referenced
>>> # from module
>>> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so(),
>>> but a runtime definition
>>> # of the symbol was not found.
>>> # rtld: 0712-001 Symbol _marpa_t_nook_is_predecessor was referenced
>>> # from module
>>> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so(),
>>> but a runtime definition
>>> # of the symbol was not found.
>>> # rtld: 0712-001 Symbol _marpa_t_nook_cause_is_ready was referenced
>>> # from module
>>> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so(),
>>> but a runtime definition
>>> # of the symbol was not found.
>>> # rtld: 0712-001 Symbol _marpa_t_nook_is_cause was referenced
>>> # from module
>>> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so(),
>>> but a runtime definition
>>> # of the symbol was not found.
>>> # rtld: 0712-001 Symbol _marpa_t_nook_parent was referenced
>>> # from module
>>> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so(),
>>> but a runtime definition
>>> # of the symbol was not found.
>>> # rtld: 0712-001 Symbol _marpa_t_nook_choice was referenced
>>> # from module
>>> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so(),
>>> but a runtime definition
>>> # of the symbol was not found.
>>> # Additional errors occurred but are not reported. at
>>> /usr/opt/perl5_5203/lib/5.20.3/aix-64all/DynaLoader.pm line 193.
>>> # at t/00-load.t line 24.
>>> # Compilation failed in require at t/00-load.t line 24.
>>> FAILED--Further testing stopped: Could not load Marpa::R2
>>> root@czapms22 /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000 >
>>>
>>>
>>> Thanks
>>> Krishna
>>>
>>> On Thursday, December 27, 2018 at 1:22:14 AM UTC+5:30, Jeffrey Kegler
>>> wrote:
>>>>
>>>> This error typically means a bad Perl installation, or that Marpa::R2
>>>> was built with a Perl different from the one that is attempting to load it.
>>>>
>>>> Best, jeffrey
>>>>
>>>> On Wed, Dec 26, 2018 at 2:41 PM <krishn...@gmail.com> wrote:
>>>>
>>>>> Hi Jeff,
>>>>>
>>>>> Getting error while installing the Marpa::R2 module.
>>>>>
>>>>> # perl Build test
>>>>> Using built-in Libmarpa
>>>>> t/00-load.t ............ Bailout called. Further testing stopped:
>>>>> Could not load Marpa::R2
>>>>> # Can't load
>>>>> '/tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so'
>>>>> for module Marpa::R2: rtld: 0712-001 Symbol __builtin_expect was
>>>>> referenced
>>>>> # from module
>>>>> /tmp/ITM_Audit_Scripts/Marpa-R2-8.000000/blib/arch/auto/Marpa/R2/R2.so(),
>>>>> but a runtime definition
>>>>> # of the symbol was not found. at
>>>>> /usr/opt/perl5/lib/5.20.1/aix-thread-multi/DynaLoader.pm line 193.
>>>>> # at t/00-load.t line 24
>>>>> # Compilation failed in require at t/00-load.t line 24.
>>>>> FAILED--Further testing stopped: Could not load Marpa::R2
>>>>>
>>>>> Kindly need your help
>>>>>
>>>>> Thanks and Regards
>>>>> Krishna
>>>>>
>>>>>
>>>>> On Tuesday, December 18, 2018 at 1:37:48 AM UTC+5:30, Jeffrey Kegler
>>>>> wrote:
>>>>>>
>>>>>> I have uploaded a new indexed release of Marpa::R2: 8.000000:
>>>>>> https://metacpan.org/pod/distribution/Marpa-R2/pod/Marpa_R2.pod
>>>>>>
>>>>>> It fixes a bug, which under unusual circumstances caused the integer
>>>>>> arguments of $recce->resume() or $recce->lexeme_complete() to be ignored.
>>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "marpa parser" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to marpa-parser...@googlegroups.com.
>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>
>>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "marpa parser" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to marpa-parser...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "marpa parser" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to marpa-parser+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
--
You received this message because you are subscribed to the Google Groups
"marpa parser" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to marpa-parser+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
