Answers to your question: (Thanks for your help)
1. Yes I can ping the linux box, while being on the linux box by pinging
192.168.1.1
2. Yes, the eth0 on the linux box has a link light.
3. on the NT box, I can ping itself (by doing a ping 192.168.1.2 on the
NT box) But no, I can't ping the NT box from the linux box (192.168.1.1)
On Wed, 17 Feb 1999, David A. Ranch wrote:
>
> Hey Jason,
>
> >eth0 Link encap:Ethernet HWaddr 00:40:C7:1C:0C:C3
> > inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>
> Ok, looks good.
>
>
> >ppp0 Link encap:Point-to-Point Protocol
> > inet addr:128.xxx.xxx.x(protecting the innocent)
> >P-t-P:128.xx.xxx.x Mask:255.255.0.0
>
> Looks good too.
>
>
> >Kernel IP routing table
> >Destination Gateway GenMask Flags MSS Window irtt Iface
> >128.xxx.xx.x 0.0.0.0 255.255.255.255 UH 1500 0 0 ppp0
> >192.168.1.0 0.0.0.0 255.255.255.0 U 1500 0 0 eth0
> >127.0.0.0 0.0.0.0 255.0.0.0 U 3584 0 0 lo
> >0.0.0.0 128.x.x 0.0.0.0 UG 1500 0 0 ppp0
>
> This also looks good.
>
> >cat /proc/sys/net/ipv4/ip_forward>
> >1
>
> Hmmm... Ok, everything looks right.
>
> - If the Linux MASQ server is 192.168.1.1, can you ping that
> same IP directly from the Linux box?
>
> - Does ETH0 on the Linux box have a LINK light?
>
> - Can you ping the NT machine behind the Linux MASQ box?
>
> --David
> .----------------------------------------------------------------------------.
> | David A. Ranch - Linux/Networking/PC hardware [EMAIL PROTECTED] |
> !---- ----!
> `----- For more detailed info, see http://www.ecst.csuchico.edu/~dranch -----'
>
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
http://tiffany.indyramp.com/mailman/listinfo/masq
Admin requests can be handled by web (above) or [EMAIL PROTECTED]
