Ok you Linux / NT folks...can someone help me out of this one...
Current setup is:
T1
Router -> Linux eth0
" eth1 -> 10BaseT-Hub -> Win95/Mac clients
-> eth1 on NT server
eth0 on NT server -> 100BaseT-Hub
From Linux I can ping the NT's eth1, but from NT I cannot ping the Linux
machine. NT is completely oblivious to this.
Also, Linux cannot see eth0 on the NT box and so consequently, no one on that
entire HUB. On the NT side, I have eth1 as 192.168.x.11 and eth0 as
192.168.x.12. Both have the same mask.
Someone told me to check the routing between the two NIC in the network
properties on the NT box....well, it's checked.
First, I'd like to solve problem #1, which is getting the NT to see the Linux
box. Then, if we have any NT guru's on this list and are willing to help me
_outside_ of this forum, I'd appreciate help with that too. I say outside of
this forum because I realise NT routing has nothing to do with Linux masquing.
Let the brain storming begin...
AMK4
--
H | Command, n.:
| Statement presented by a human and accepted by a computer in
| such a manner as to make the human feel as if he is in control.
|____________________________________________________________________
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ashley M. Kirchner <[EMAIL PROTECTED]> . 303.442.6410 x130
SysAdmin / Websmith . 800.441.3873 x130
Photo Craft Laboratories, Inc. . 3550 Arapahoe Ave
http://www.pcraft.com . Boulder, CO 80303
.................. . . . .
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
http://tiffany.indyramp.com/mailman/listinfo/masq
Admin requests can be handled by web (above) or [EMAIL PROTECTED]
