>
> > I have one thing. I have 5 subnets with internal ips behind my firewall.
> >And I wanted to masq every subnet with another inetrnet ip. For exapmle:
> >
> > 192.168.1.0 to 193.193.193.11
> > 192.168.2.0 to 193.193.193.12
>
>
> This is IP Source Routing and is NOT done via IP MASQ directly. Here is
> an email about this exact issue and I think I'll add this to the HOWTO
> as well.
>
> --
>
> > We want to be able to redirect from a source ip or network out via a
> > given interface.
>
> We're getting an increasing number of queries along these lines. To
> quote Keith Owens (who I'm *still* chasing to write a mini-HOWTO for
> iproute2) in answer to a similar routing question (see the ipchains
> archives for `Re: Multiple Masquerading'). Basically, ignore the
> parts about masquerading!
>
> Primary FTP site is:
>
> ftp://ftp.inr.ac.ru/ip-routing/
Please note that this archive doesn't come with any documentation, and the
command line is so obscure it is useless without it :) After a bit of
hunting around I located:
http://www.compendium.com.ar/policy-routing.txt
Which is sortof a mini-howto on route2, and that has pointers to further
information. I have got it working on my site, so feel free to gimme a
buzz if you have any problems.
Richard
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
http://tiffany.indyramp.com/mailman/listinfo/masq
Admin requests can be handled by web (above) or [EMAIL PROTECTED]
