Hi there,
Try sticking this line:
append="ether=0,0,eth0 ether=0,0,eth1"
into your lilo.conf, and run lilo, and reboot. It should force the OS to
detect the other network card. Good luck!
Rob
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Brad Tumy
> Sent: Wednesday, May 05, 1999 8:30 AM
> To: '[EMAIL PROTECTED]'
> Subject: [Masq] same network adapters?
>
>
>
> When installing more than one network adapter in a Linux box do they
> need to be the same? Right now I have a 3com and an Intel card and I
> can't get the OS to recognize the Intel card. I just removed the Intel
> card from another machine so I am 99.9% certain that the card is not
> faulty. I am using Red Hat 5.2 if that makes a difference.
>
> Thanks.
>
> Brad
> --
> Manager, Information Technology
> RAPS
> 301.770.2920 ext 241
> http://www.raps.org
>
>
>
> _______________________________________________
> Masq maillist - [EMAIL PROTECTED]
> http://tiffany.indyramp.com/mailman/listinfo/masq
> Admin requests can be handled by web (above) or
> [EMAIL PROTECTED]
>
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
http://tiffany.indyramp.com/mailman/listinfo/masq
Admin requests can be handled by web (above) or [EMAIL PROTECTED]
