thanks in advance for any help that you offer... I have just hooked up my cable modem (with telco return) and want to make IP masquerading work again. First of all to connect to the internet I need to call a phone number which connects. my modem send all data traffic and my cable modem recieves incoming cable traffic. My cable modem Ethernet card has to have the ip of 10.0.0.1. I have this part working. Right now I want to let my cable modem ip masquerade for 2 machines (192.168.0.37 and 192.168.0.69) which have setup as a gateway 192.168.0.1 which is the other ethernet card in my masquerading box. My question is how do I do this. Right now I cannot ping into or out of my linux box. All ping requests are going through the cable modem. Why I cannot ping my 192.168.0.1 is beyond me as it worked before for all three machines. 1) Do I have to have different subnet masks setup for each address space (i.e 10.0.0.x and 192.168.0.x)? 2) What routing command do I have to give it to make it masquerade through the cable modem (remember it has a telco return.) I used to be able to ipmasq with just a modem but since I changed my second ethernet card to 10.0.0.1 I have not been able to get that working. Does every card in my machine have to be 10.0.0.x in order to make it work. thanks for any help that you can give me, Matthew A. Reklau _______________________________________________________________ Get Free Email and Do More On The Web. Visit http://www.msn.com _______________________________________________ Masq maillist - [EMAIL PROTECTED] http://tiffany.indyramp.com/mailman/listinfo/masq Admin requests can be handled by web (above) or [EMAIL PROTECTED]
