hello,
How can I configure ipfwadm or ipautofw to allow net2phone to work through the
firewall?
I'm using linux as a router and a firewall . Net2phone is on a computer behind
it.
I used the HOWTO you give on the site : members.home.net/masq
Ipautofw doesn't work. I always have the message : "setsockopt failed:
protocol not available".
the command is : ipautofw -A -r 6613 6613 -h 192.168.0.2
I tried to use this : ipfwadm -F -a accept -b -P tcp -S <local IP> <port> -D
0.0.0.0/0 1024:65535
the port I tried to use is : 6613 6614 ( for the TCP port and the UDP Port)
I tried the use ipportfw path but here the problem is different : I always
have the message : " file /proc/net/ip_portfw does'nt exists ! Are you sure
you have installed ipportfw?"
I must configure the TCP Port and the UDP Port to allow Net2Phone to work ( so
that external users can call or receive any call).
Can anyone help me?
Thanks,
Lokhat Mohamed Sa�d
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
http://tiffany.indyramp.com/mailman/listinfo/masq
Admin requests can be handled by web (above) or [EMAIL PROTECTED]
